component tolerance and type

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

Post Reply
jestaudio
Posts: 654
Joined: Sat Mar 12, 2011 4:12 pm
Location: UK

component tolerance and type

Post by jestaudio »

Can some of you kind folks take a look at the layout and give me your educated guess,s on what the resistor marked in red would want to be, many thanks
You do not have the required permissions to view the files attached to this post.
Last edited by jestaudio on Thu Jun 23, 2011 6:03 pm, edited 1 time in total.
Top
diagrammatiks
Posts: 558
Joined: Sun Mar 27, 2011 12:28 am

Re: component tolerance and type

Post by diagrammatiks »

your colors didn't get saved.
Top
jestaudio
Posts: 654
Joined: Sat Mar 12, 2011 4:12 pm
Location: UK

Re: component tolerance and type

Post by jestaudio »

diagrammatiks wrote:your colors didn't get saved.
corrected now lol
Top
diagrammatiks
Posts: 558
Joined: Sun Mar 27, 2011 12:28 am

Re: component tolerance and type

Post by diagrammatiks »

here take a look at this black cat

[img:1024:685]http://s339.photobucket.com/albums/n441 ... C_0117.jpg[/img]

Samson's amps pretty much use 1-2watt carbon comps for everything except the power supply.
Top
jestaudio
Posts: 654
Joined: Sat Mar 12, 2011 4:12 pm
Location: UK

Re: component tolerance and type

Post by jestaudio »

Any opinion on the diodes used on the tube and soldo state rectifier?
Top
surfsup
Posts: 1513
Joined: Mon Nov 29, 2010 12:21 am
Location: Chicagoland

Re: component tolerance and type

Post by surfsup »

uf4007s
Top
diagrammatiks
Posts: 558
Joined: Sun Mar 27, 2011 12:28 am

Re: component tolerance and type

Post by diagrammatiks »

jestaudio wrote:Any opinion on the diodes used on the tube and soldo state rectifier?
ya uf4007s although any soft recovery rectifier would do. 1000v 1a should be enough.
Top
Post Reply

Return to “Technical Discussion”