Rebel has 3 outs for 4\8\16/
I need two 4 ohm holes. Egnater apparently takes weekends off! Does anyone know if I use the 4, does the 8 become 4?
Doesn't sound like it.. I need a pigtail, huh?
=|
Egnater ohmage
Moderators: pompeiisneaks, Colossal
Re: Egnater ohmage
running two mismatched taps on the ot at once can cause strain. your best off to daisy chain the cabinets meter the speaker cable and use the proper imp.
My Daughter Build Stone Henge
- Reeltarded
- Posts: 10189
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: Egnater ohmage
Thanks.. I wasn't sure if the rating stayed constant if the next lower jack was used, not being an electronics gooorooo.
Appreciate the reply.
Appreciate the reply.
Re: Egnater ohmage
Not familiar with that amp but you should be able to look inside the chassis to see how the speaker(s) jacks are wired.
Is there one jack with an impedance switch or multiple jacks?
Is there one jack with an impedance switch or multiple jacks?
Tom
Don't let that smoke out!
Don't let that smoke out!