Peavey Hybrid
Moderators: pompeiisneaks, Colossal
-
Andy Le Blanc
- Posts: 2582
- Joined: Sat Dec 22, 2007 1:16 am
- Location: central Maine
-
Andy Le Blanc
- Posts: 2582
- Joined: Sat Dec 22, 2007 1:16 am
- Location: central Maine
-
Andy Le Blanc
- Posts: 2582
- Joined: Sat Dec 22, 2007 1:16 am
- Location: central Maine
Re: Peavey Hybrid
1v ac. @ 1.2k input, gives me a max pre out at around 2.9v ac.
This is enough to make an output across a 8ohm resistive load of 22.5v or 63w
not too bad for a lark. It wants a 4 ohm load, I'll try a different loading and
freq. tomorrow.
This is enough to make an output across a 8ohm resistive load of 22.5v or 63w
not too bad for a lark. It wants a 4 ohm load, I'll try a different loading and
freq. tomorrow.
lazymaryamps