Forgive me if this has been asked before but what size bit is used on these cabs? is it 3/8" or 1/2" for that almost semi circle look.
thanks
Roundover bit
Moderators: pompeiisneaks, Colossal
Re: Roundover bit
The wood is 3/4, so you need to use 3/8 to get the smei-circle front bead around the front panel.tonelab2 wrote:Forgive me if this has been asked before but what size bit is used on these cabs? is it 3/8" or 1/2" for that almost semi circle look.
thanks