nasaly tight

[andrew]

Hello, I built the "tweaked DeLite" from scratch with 2-6v6, 345vts PT,(clean and OD channel only with no PAB switch) and a cheap 18watt OT. The voltages are in the ballpark but I get a nasaly OD tone.A super light touch sounds right but when I dig in it gets thin and tight. I know great tone is a combination of MANY factors but are there any that come to mind? Thanks!

[heisthl]

Did you put the right value "snubbers" on V2?

[Sonny ReVerb]

From reading most of the D'lite mod posts I've gathered that the "tweaked" schem was tailored for 6L6's. I was wondering myself how it would work with 6V6's.

[bluesfendermanblues]

Try different tubes in V2, before heating up the soldering iron.

I have more often than not, tried "modifying" an amp, only to realise, that swapping tubes could have made the same difference.

[andrew]

Thanks for the responses! The snubbers were correct. I went with the 100k/1.5k/10uf setup on the first tube with no 44M/.05. I was also looking for better cleans and for me the OD felt better this way. Thanks for the insight!