Fender Jack White Pano Verb

Fender Amp Discussion

Moderators: pompeiisneaks, Colossal

Post Reply
User avatar
rccolgan
Posts: 509
Joined: Mon Apr 03, 2017 1:39 am
Contact:

Fender Jack White Pano Verb

Post by rccolgan »

Alright.. who is gonna reverse engineer one? That's a lot of PCB!

https://imgur.com/a/sFidcm2
You do not have the required permissions to view the files attached to this post.
Ryan
https://www.thetonegeek.com/
User avatar
martin manning
Posts: 14308
Joined: Sun Jul 06, 2008 12:43 am
Location: 39°06' N 84°30' W

Re: Fender Jack White Pano Verb

Post by martin manning »

Channeling Magnatone?
Roe
Posts: 1918
Joined: Thu May 31, 2007 2:10 pm

Re: Fender Jack White Pano Verb

Post by Roe »

does it have two OTs or one OT with dual primaries and secondaries?
www.myspace.com/20bonesband
www.myspace.com/prostitutes
Express, Comet 60, Jtm45, jtm50, jmp50, 6g6b, vibroverb, champster, alessandro rottweiler
4x12" w/H75s
User avatar
rccolgan
Posts: 509
Joined: Mon Apr 03, 2017 1:39 am
Contact:

Re: Fender Jack White Pano Verb

Post by rccolgan »

Roe wrote: Tue Feb 04, 2025 7:18 am does it have two OTs or one OT with dual primaries and secondaries?
I believe two separate OTs. If you click the link you'll see 20+ more pics including the tube/transformer chart
Ryan
https://www.thetonegeek.com/
BrownIsound
Posts: 69
Joined: Sat Apr 23, 2022 9:39 pm

Re: Fender Jack White Pano Verb

Post by BrownIsound »

No schematic available yet?
User avatar
rccolgan
Posts: 509
Joined: Mon Apr 03, 2017 1:39 am
Contact:

Re: Fender Jack White Pano Verb

Post by rccolgan »

BrownIsound wrote: Tue Feb 04, 2025 1:19 pm No schematic available yet?
Not to my knowledge... but an official FMIC warranty technician might have access to the schematics.. or at least that's how some schematics of new-er amps have been made available in the past.. This amp is super cool! Lots of neat features. I'd definitely want or build one in the future
Ryan
https://www.thetonegeek.com/
xjudex
Posts: 1
Joined: Thu Feb 13, 2025 3:59 pm

Re: Fender Jack White Pano Verb

Post by xjudex »

I have one and it's incredible. I would definitely like a schematic, though, as I want to convert it to hand wired in the next year or two.
User avatar
rccolgan
Posts: 509
Joined: Mon Apr 03, 2017 1:39 am
Contact:

Re: Fender Jack White Pano Verb

Post by rccolgan »

xjudex wrote: Mon Feb 17, 2025 3:58 pm I have one and it's incredible. I would definitely like a schematic, though, as I want to convert it to hand wired in the next year or two.
Nice!! I only heard great things about that amp. You might have to champion the reverse engineering for us :D
Ryan
https://www.thetonegeek.com/
User avatar
solderhead
Posts: 160
Joined: Thu Jan 16, 2025 5:42 pm

Re: Fender Jack White Pano Verb

Post by solderhead »

rccolgan wrote: Tue Feb 04, 2025 10:09 am
Roe wrote: Tue Feb 04, 2025 7:18 am does it have two OTs or one OT with dual primaries and secondaries?
I believe two separate OTs. If you click the link you'll see 20+ more pics including the tube/transformer chart

From the link above:

Image
Better tone through mathematics.
lonote
Posts: 187
Joined: Thu Jan 25, 2024 3:12 pm

Re: Fender Jack White Pano Verb

Post by lonote »

Watched a video or two a while back when it was first released, some cool ideas put into the design. I might even have seen the tube chart/layout sticker, but didn't pay much attention at the time.

Looking now, after the two power amp sections are subtracted (power tubes & PI), that leaves 5 preamp/effects tubes (10 triodes). It would be interesting to see how those are divvied up & if anything was tweaked or modified from the circuits we are familiar with.

The typical Fender reverb circuit uses 1-1/2 (3 triodes), 6G-era harmonic trem uses 2-1/2 (5 triodes), which leaves just one tube for gain stages.
Last edited by lonote on Tue Feb 25, 2025 3:58 am, edited 1 time in total.
lonote
Posts: 187
Joined: Thu Jan 25, 2024 3:12 pm

Re: Fender Jack White Pano Verb

Post by lonote »

Control description from the Owner's Manual:
PanoVerb Controls.jpg
You do not have the required permissions to view the files attached to this post.
Post Reply