As soon as I saw your photos this morning of the distance between the jacks and the parts board I knew that's what your issue was .
This same issue takes place with the tiny terror amps when more gain gets pushed out of them only it's due to the speaker jacks feeding back across the narrow amp into the input jacks.
My fix is a thin brass or copper contact glued to box of high heat insulating paper for its former with a ground wire soldered on.
Help troubleshooting a Princeton Reverb Build
Moderators: pompeiisneaks, Colossal
-
Stevem
- Posts: 5144
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
Re: Help troubleshooting a Princeton Reverb Build
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!