ODS - Single 12" Speaker - Rear Oval Dimension Check

Overdrive Special, Steel String Singer, Dumbleland, Odyssey, Winterland, etc. -
Members Only

Moderators: pompeiisneaks, Colossal

Post Reply
User avatar
RJ Guitars
Posts: 2663
Joined: Tue Nov 14, 2006 3:49 am
Location: Los Alamos, New Mexico
Contact:

ODS - Single 12" Speaker - Rear Oval Dimension Check

Post by RJ Guitars »

Hey Guys,

I'm closing in on having an ODS ready to use and have the cabinet almost finished except for the back panel. I went through some old posts and saw that the rear oval was listed at 9x11 inches.

When I laid that out it looks really big. I don't want to deviate from the working formula if it's correct but I would like to confirm before I start removing wood I can't put back.

Does anybody know for sure?

thanks,

rj
Good, Fast, or Cheap -- Pick two...

http://www.rjguitars.net
http://www.rjaudioresearch.com/
http://diyguitaramps.prophpbb.com/
User avatar
Funkalicousgroove
Posts: 2235
Joined: Mon Jul 25, 2005 8:04 pm
Location: Denver, CO
Contact:

Re: ODS - Single 12" Speaker - Rear Oval Dimension Check

Post by Funkalicousgroove »

9 * 11 is correct
Owner/Solder Jockey Bludotone Amp Works
User avatar
RJ Guitars
Posts: 2663
Joined: Tue Nov 14, 2006 3:49 am
Location: Los Alamos, New Mexico
Contact:

Re: ODS - Single 12" Speaker - Rear Oval Dimension Check

Post by RJ Guitars »

Thanks Funk...

I can't help but think that is a very similar port size to the actual speaker.... there is probably some correlation on that?

rj
Good, Fast, or Cheap -- Pick two...

http://www.rjguitars.net
http://www.rjaudioresearch.com/
http://diyguitaramps.prophpbb.com/
Post Reply