chassies for OD

sergio · Post by **sergio** » Thu Jan 17, 2008 4:01 pm

The right measures chassie for a D-clone , it's ok?: 10" x 5" x 2" (hammond alluminium).
Thanks all

mlp-mx6 · Post by **mlp-mx6** » Thu Jan 17, 2008 4:04 pm

Are you sure those are the measurements of your candidate chassis?

Bob-I · Post by **Bob-I** » Thu Jan 17, 2008 4:18 pm

Yes, that's really small. Maybe your conversion from metric to inches is incorrect.

sergio · Post by **sergio** » Thu Jan 17, 2008 4:42 pm

Yes Bob , maybe my conversion is incorrect.

You know the exact measures?

Thanks

ampdork · Post by **ampdork** » Thu Jan 17, 2008 10:08 pm

approximately 482.6 x 57.15 x 203.2 millimeters

sergio · Post by **sergio** » Thu Jan 17, 2008 10:23 pm

Thank you for help Ampdorc

odourboy · Post by **odourboy** » Fri Jan 18, 2008 12:15 am

ampdork wrote:approximately 482.6 x 57.15 x 203.2 millimeters

LMAO here!

Noel Grassy · Post by **Noel Grassy** » Fri Jan 18, 2008 12:20 am

Come on, ampdorc looks slightly more European to me at least.

candh · Post by **candh** » Fri Jan 18, 2008 1:43 am

ampdork wrote:approximately 482.6 x 57.15 x 203.2 millimeters

Yes, measuring to 2 decimal points is very approximate...

Tube Amp Archive