Death By Conversion II: Adventures in HRM Land

[ayan]

Brownnote Suite!

Need details.

Gil

[anyone]

Brownnote Suite!

Yes, please! Details?

I saw you hangin' last year at the Fuchs booth, but was bummed that I didn't really get to hear you play. By that point, I'd already been there a few hours and was NAMMed out anyway though... It'd be cool to witness all you killer players/builders in real life in one place, away from the madness.


Cheers,

Chris

[mat]

Gil, do You have seperate masters on Your amp ? Can I leave both masters in with this conversion ?

Btw. I lifted the HRM ground and obviously lot louder I like the direction it took the amp. I did put in the snubbers and start to make the swap-board.

If I can leave the two masters in I'll change the OD master pot to 100kL and leave out the 200k trimmer.

[Fischerman]

Hey mat,
In case you haven't seen it...Gil posted some current pix in the files section of this conversion. And it appears he may be gone for the holidays.

[ayan]

Gil, do You have seperate masters on Your amp ? Can I leave both masters in with this conversion ?

Btw. I lifted the HRM ground and obviously lot louder I like the direction it took the amp. I did put in the snubbers and start to make the swap-board.

If I can leave the two masters in I'll change the OD master pot to 100kL and leave out the 200k trimmer.

I do have separate masters, that's the whole readon behind the "conversion board." I didn't change the OD master on the front panel, it remains 1 Meg.

Cheers,

Gil

[mat]

Gil, do You have seperate masters on Your amp ? Can I leave both masters in with this conversion ?

Btw. I lifted the HRM ground and obviously lot louder I like the direction it took the amp. I did put in the snubbers and start to make the swap-board.

If I can leave the two masters in I'll change the OD master pot to 100kL and leave out the 200k trimmer.

I do have separate masters, that's the whole readon behind the "conversion board." I didn't change the OD master on the front panel, it remains 1 Meg.

Cheers,

Gil

Jep, saw the pictures Thanks for the info