Twin PA Valve Junior with Power Scaling

[mooreamps]

Yea! You were a big help in this thread!
http://www.18watt.com/modules.php?name= ... sc&start=0

Not taking sides here - looks like the thread has been moderated out of existence (like most of the rest of 18 watt )

Ya, and it was some of the others who were reprimanded by the moderators who were flaming me in the first place.
-g

[mooreamps]

How does your dual PA thing work? After the last preamp stage coupler split off into 2 seperate output tubes, seems pretty simple. But how do you mix the signal from the 2 power tubes?

check your e-mail. The schematic has been sent.

-g

[benoit]

Vaporized

[UR12]

Ya, and it was some of the others who were reprimanded by the moderators who were flaming me in the first place.

I'm not trying to take anyone down. You read my initial posts, and it's other people un-corking on me. Besides, I have working prototypes. I design and build new circuits, and then post some of my research on design work for a guitar amp, on "oh my god" post on a public forum that talks about "building guitar amps", I have no control over that.

-g

Just as I thought, in your mind you aren’t arrogant, condescending or lacking social skills. It’s everyone else that is the problem. Did you ever wonder why you have been flamed on EVERY forum you have posted on? You have had probably 100s of people tell you the same thing on different forums. Are you really so vain that you think everyone is just jealous of you and wants to flame you in public because of jealously?

Besides,
A lot of people have working prototypes why does that make you special?
You are not the only guy in the world designing “NEW” circuits out of old circuits. You will be hard pressed to come up with something that hasn’t already been done before and since you never post COMPLETE circuits for people to see, for all I know your circuits aren’t new. Where is the proof? If it’s in your working prototypes, from what I have heard, you got a long way to go IMO.

You could have left out the arrogant OMG remark. From what I have seen you have been very little help to people on this forum. So we keep asking the same question and you never provide an answer. Why are you really here? What did you see on this forum that made you want to join?

You definitely have control over your arrogant, condescending, egotistical remarks and poor social skills. You just choose to ignore the idea that a lot of people on the internet take offense to your remarks and you continue to fuel the flames. That is your choice and it is under your complete control.




Arrogant
Having or displaying a sense of overbearing self-worth or self-importance. Marked by or arising from a feeling or assumption of one's superiority toward others

Condescending
snobby: behaving toward other people in a way that shows you consider yourself socially or intellectually superior to them

Egotistical
Adjective. Characteristic of those having an inflated idea of their own importance.

Social skills

Ability to communicate, persuade, and interact with other members of the society, without undue conflict or disharmony.

[mooreamps]

It is my intention to re-engineer the vacuum tube guitar amplifier. I am designing a new line of guitar amplifiers. I am bringing up and building on my own designs. I have a working power brake, something I don't think even Kevin has a reliable working power brake, and that's just something you are just going to have to learn to live to warm-up too.

Even now as I type, I'm listening to Mike Osborn of Texas Hold-en play though one of my custom amps live on 107.7 The Bone out of San Francisco as guest DJ. So, your opinion is somewhat dissappointing. Make me wonder why you would spend so much effect slamming an amp designer such as myself.... Do you slam other amp designers you know nothing about ????

-g

[UR12]

It is my intention to re-engineer the vacuum tube guitar amplifier.

Really, Which one, the VJ?

I am designing a new line of guitar amplifiers.

VJs with moore knobs and leds? All your new amps look like VJs

I have a working power brake, something I don't think even Kevin has a reliable working power brake, and that's just something you are just going to have to learn to live to warm-up too.

I guess that makes you smarter than Kevin then Huh? I have a heat pump to keep me warm.

Even now as I type, I'm listening to Mike Osborn of Texas Hold-en play though one of my custom amps live on 107.7 The Bone out of San Francisco as guest DJ. So, your opinion is somewhat dissappointing.

Mike who, Never heard of him. What lable is he with? Which amp, the one that looks like a VJ?

Make me wonder why you would spend so much effect slamming an amp designer such as myself.... Do you slam other amp designers you know nothing about ????

No, You're the only one. I only slam the arrogant, condescending and egotistical ones and you're the only one I know. I think I answered ALL of your questions so when are you going to start answering mine?

Got to cut this short..... Since we are name dropping, I have to go catch Billy, Dusty and Frank. They are a small band from Texas but i doubt they know Mike. You may have heard of them ....ZZ Top

[mooreamps]

Fine. You design something and post it, here...
-g

[HeeBGB]

Fine. You design something and post it, here...
-g

He has! Many times over! What have you contributed? I mean besides a polished turd

[mooreamps]

Fine. You design something and post it, here...
-g

He has! Many times over! What have you contributed? I mean besides a polished turd

That's good. That means you two guys will understand this.


Scratch build ; 36 watts SE ; stereo ; Electronic Power Scaling ; one KT-88 voiced for bass in parallel with one EL-34 voiced for treble ; with "Built In Test Equipment". Be done in a couple weeks. I'll post the photo's, and the video clips when Mike Osborn plays it next month on one of the cable TV channels.

BTW ; give my regards to the boys of ZZ.......


-g

[HeeBGB]

Fine. You design something and post it, here...
-g

He has! Many times over! What have you contributed? I mean besides a polished turd

That's good. That means you two guys will understand this.


Scratch build ; 36 watts SE ; stereo ; Electronic Power Scaling ; one KT-88 voiced for bass in parallel with one EL-34 voiced for treble ; with "Built In Test Equipment". Be done in a couple weeks. I'll post the photo's, and the video clips when Mike Osborn plays it next month on one of the cable TV channels.

BTW ; give my regards to the boys of ZZ.......


-g

Yea...um...photos and vid clips are nice BUT Dana and his brother Richie give us designs in the form of layouts and schematics. Ever hear of the 18 watt TMB? Yes that was Richie and Dana. There's actually a lot more than that but the point is...they don't ask for ANYTHING in return. I have never heard them ask "What's in it for me?" BTW! I've already gotten a 25 watt SE design from Dana. Octal AND AX7 pre-amps with a blend control to mix the two. Also footswitchable between them as well. He actually built it and sent it to me to try out to see if I want to build it. We don't live close either. You gonna do that? You're barking up the wrong tree if you're gonna try to compare your "generosity" to Dana's. He's got a LONG track record. You can't touch him so don't bother trying!

As for "built in test equipment"....who cares? If the amp sounds like shit all the test points in the world aren't going to matter.

[Richie]

http://www.youtube.com/watch?v=3xC6oVvwtIo
or more here

http://www.youtube.com/user/gmm20

[LeftyStrat]

Any chance you guys could get a room?

[mooreamps]

I never said I was generous. Secondly, I've already put out about as much of my research as I care to. I've seen the prints. I don't do "wideband" pre-amp gain stages. I don't do wideband non-voiced PA power tubes..... I don't do single-stack pre-amp gain channels biased with resistors instead of using a constant-current dc charge pump. .... My power brake is not a FET that, and all due respect to Kevin, runs hot.....

I'm not using much of anything I see posted on a TMB or any other print short of using a split banaxdell tone stack. Oh, gee that's right, you would not understand why I would split a tone stack into two halves, one for the bass pre-amp channel, and one for the treble pre-amp channel..... You'all so fricking good you already know about that one...... You already are doing PA bass/treble voiceing inside you're twin PA builds with IF lowpass filtering and electronic power scaling....


Besides, I'm not the one who's barking.... and I'm not going away........


------


-g

[benoit]

Vaporized

[UR12]

I never said I was generous. Secondly, I've already put out about as much of my research as I care to. I've seen the prints. I don't do "wideband" pre-amp gain stages. I don't do wideband non-voiced PA power tubes..... I don't do single-stack pre-amp gain channels biased with resistors instead of using a constant-current dc charge pump. .... My power brake is not a FET that, and all due respect to Kevin, runs hot.....

Which begs an answer to the question why are you here? If that is what you are into, you're right, none of that stuff is in a Trainwreck or a Dumble. They sound perfectly fine without any of the circuits you mentioned. You are by your own words, "not generous" and are not planning on putting out any more of your research. You call yourself a teacher. What is it you want to teach us?

I'm not using much of anything I see posted on a TMB or any other print short of using a split banaxdell tone stack. Oh, gee that's right, you would not understand why I would split a tone stack into two halves, one for the bass pre-amp channel, and one for the treble pre-amp channel..... You'all so fricking good you already know about that one......

I never heard of a "banaxdell". I like the Baxandall tone stack. I have known about it for quite a while now and used it in a few amps. It's a very good tone stack. One of my favorites.

You already are doing PA bass/treble voiceing inside you're twin PA builds with IF lowpass filtering and electronic power scaling....

oh darn ....I guess you got me there

Besides, I'm not the one who's barking.... and I'm not going away........

I would call telling someone to "Put a cork in it" barking. Or "you guys will never get it." That's kind of barking. I don't recall anyone asking you to leave, I keep asking you over and over "Why are you here" and by your silence I can only guess that you don't know the answer to that question or don't want to share it with us. I have implied that I don't want to see a bunch of VJ stuff get started over here like it did at 18watt, that is true.