That's what I always do if NFB wiring is a concern. It's easily reversable, and if that doesn't fix your problem, you know something else is going on. Then, fix any other issues, and reconnect the NFB. If you have an issue then, you know that's the problem, and you can switch the primaries.martin manning wrote:or just disconnect the feedback.
Problem with startup
Moderators: pompeiisneaks, Colossal
-
johnnyreece
- Posts: 1072
- Joined: Thu Jan 26, 2012 2:05 am
- Location: New Castle, IN
Re: Problem with startup
-
martin manning
- Posts: 14308
- Joined: Sun Jul 06, 2008 12:43 am
- Location: 39°06' N 84°30' W
Re: Problem with startup
The routing of the NFB wire could be the problem, so disconnecting the FB is not as conclusive as swapping the leads, but it will tell you that the problem is with the FB loop.
Re: Problem with startup
Swapped the primaries. Problem solved. Thanks for the advice.