Amp suggestion

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

Post Reply
Suit
Posts: 10
Joined: Mon Apr 14, 2014 1:36 am
Location: Saginaw, MI

Amp suggestion

Post by Suit »

I have a maz jr NR that I love but want something a little more touch sensitive. I love everything dr z makes. But I simply cannot, and won't be able to any time soon, afford a Z Wreck.

Are there any options? I like using my amp as my main dirt, and the maz does it wonderfully. The only problem is no matter how lightly I play. It still stays pretty dirty. I have watched enough demos to see the z wreck has this kind of touch sensitivity. Any amp builders in or around michigan that may be able to make something? Preferably for less money than a Z wreck?

Thanks!
User avatar
billyz
Posts: 1305
Joined: Fri Aug 10, 2007 6:17 pm
Location: Spokane, WA
Contact:

Re: Amp suggestion

Post by billyz »

Try a 12ay7 in v1. Or you can reduce the plate load resistor to 50k or even 47k. It's a parallel triode .
User avatar
billyz
Posts: 1305
Joined: Fri Aug 10, 2007 6:17 pm
Location: Spokane, WA
Contact:

Re: Amp suggestion

Post by billyz »

Damn debug mode double post
Suit
Posts: 10
Joined: Mon Apr 14, 2014 1:36 am
Location: Saginaw, MI

Re: Amp suggestion

Post by Suit »

See I have tried a 12ay7 tube and it doesn't have enough gain it it. The goal would be to have the same crunch with more touch.
User avatar
billyz
Posts: 1305
Joined: Fri Aug 10, 2007 6:17 pm
Location: Spokane, WA
Contact:

Re: Amp suggestion

Post by billyz »

5751 maybe? Or the plate resistor. You can also try the lower gain tubes in v2 or v3. That might get the early crunch with more clean headroom.
evh0u812
Posts: 28
Joined: Tue Dec 13, 2011 7:20 am

Re: Amp suggestion

Post by evh0u812 »

What about a kit or fully assembled Rocket from.Ceriatone?
There are a few subtle.differences in the circuit but that would get you in the ballpark.
Suit
Posts: 10
Joined: Mon Apr 14, 2014 1:36 am
Location: Saginaw, MI

Re: Amp suggestion

Post by Suit »

billyz wrote:5751 maybe? Or the plate resistor. You can also try the lower gain tubes in v2 or v3. That might get the early crunch with more clean headroom.
I'll give it a try. I was really looking more for a new amp suggestion as I love my maz for what it is. It would be nice to add something for versatility.
Suit
Posts: 10
Joined: Mon Apr 14, 2014 1:36 am
Location: Saginaw, MI

Re: Amp suggestion

Post by Suit »

evh0u812 wrote:What about a kit or fully assembled Rocket from.Ceriatone?
There are a few subtle.differences in the circuit but that would get you in the ballpark.
That may be an option I will have to listen to some demos. Was the z wreck built most to resemble a rocket?
Post Reply