Top reasons you know your an "Amp Builder"

Non-tube amp discussion to discuss music, girls, life, etc.

Moderators: pompeiisneaks, Colossal

User avatar
cbass
Posts: 4401
Joined: Sat Jul 23, 2011 6:17 pm
Location: Between Pomona & Bakersfield

Re: Top reasons you know your an "Amp Builder"

Post by cbass »

amplifiednation wrote:Tinning stranded wire makes you feel morally superior
If your really superior you'd have topcoat wire
amplifiednation
Posts: 2091
Joined: Sun Dec 26, 2010 6:19 pm
Location: Boston
Contact:

Re: Top reasons you know your an "Amp Builder"

Post by amplifiednation »

You don't find it funny when you hear someone say 'DC Voltage can't kill you'
Amplified Nation
www.amplifiednation.com
@ampnation
User avatar
Phil_S
Posts: 6048
Joined: Tue Oct 23, 2007 10:12 pm
Location: Baltimore, MD

Re: Top reasons you know your an "Amp Builder"

Post by Phil_S »

Jana wrote:You contemplate installing dzus 1/4 turn aircraft fasteners for the chassis mounting hardware--it will be much quicker to get in and swap the 100pf cap with a 250pf.
...but you don't want to install a switch to retain both caps because you don't want to bugger up the panel.
amplifiednation
Posts: 2091
Joined: Sun Dec 26, 2010 6:19 pm
Location: Boston
Contact:

Re: Top reasons you know your an "Amp Builder"

Post by amplifiednation »

You can hold your DMM probes like chopsticks.
Amplified Nation
www.amplifiednation.com
@ampnation
Bob S
Posts: 1575
Joined: Sat Feb 14, 2009 2:38 pm
Location: Up there with the Michiganders

Re: Top reasons you know your an "Amp Builder"

Post by Bob S »

When looking at Larry - Distortion's cabs causes a dampness in certain areas.
:shock:
:lol:
Why Aye Man
Smokebreak
Posts: 1391
Joined: Tue Dec 18, 2012 5:53 pm
Location: Texas

Re: Top reasons you know your an "Amp Builder"

Post by Smokebreak »

Phil_S wrote:
Jana wrote:You contemplate installing dzus 1/4 turn aircraft fasteners for the chassis mounting hardware--it will be much quicker to get in and swap the 100pf cap with a 250pf.
...but you don't want to install a switch to retain both caps because you don't want to bugger up the panel.
....but you still stare at it for an hour and think, "Is this worth my time?"
User avatar
Reeltarded
Posts: 10189
Joined: Sat Feb 14, 2009 4:38 am
Location: GA USA

Re: Top reasons you know your an "Amp Builder"

Post by Reeltarded »

I actually woke myself up a couple times with phrases like "four seventy kay".

No idea. Must be a code.
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.
User avatar
NickC
Posts: 1814
Joined: Fri May 14, 2010 1:05 pm
Location: Upstate New York

Re: Top reasons you know your an "Amp Builder"

Post by NickC »

yellow violet yellow
Smokebreak
Posts: 1391
Joined: Tue Dec 18, 2012 5:53 pm
Location: Texas

Re: Top reasons you know your an "Amp Builder"

Post by Smokebreak »

You are outside at 8:54am in 30deg drilling holes for a term strip in your express to turn it into an 800 b/c you couldn't get it quite right, and you don't want to wake your wife, cause she will surely think you are crazy.
User avatar
johnnyreece
Posts: 1072
Joined: Thu Jan 26, 2012 2:05 am
Location: New Castle, IN

Re: Top reasons you know your an "Amp Builder"

Post by johnnyreece »

Smokebreak wrote:You are outside at 8:54am in 30deg drilling holes for a term strip in your express to turn it into an 800 b/c you couldn't get it quite right, and you don't want to wake your wife, cause she will surely think you are crazy.
Or out at 9:00 PM in -5 degrees to file the rough edges on your cake pan chassis (yes, I was doing that last night).
John_P_WI
Posts: 1457
Joined: Wed Aug 15, 2007 4:29 pm
Location: Wisconsin

Re: Top reasons you know your an "Amp Builder"

Post by John_P_WI »

When you can eloquently string several sentences together of non-related curse words for stepping on a the bent lead of a resistor hiding in the carpet with your barefoot. Piercing the skin and firmly implanting itself in said foot.
Smokebreak
Posts: 1391
Joined: Tue Dec 18, 2012 5:53 pm
Location: Texas

Re: Top reasons you know your an "Amp Builder"

Post by Smokebreak »

John_P_WI wrote:When you can eloquently string several sentences together of non-related curse words for stepping on a the bent lead of a resistor hiding in the carpet with your barefoot. Piercing the skin and firmly implanting itself in said foot.
Wow this was my next one, but I was gonna with " instead of adhering to the schedule of testing your blood sugar the old fashioned way..."
Smokebreak
Posts: 1391
Joined: Tue Dec 18, 2012 5:53 pm
Location: Texas

Re: Top reasons you know your an "Amp Builder"

Post by Smokebreak »

johnnyreece wrote:
Smokebreak wrote:You are outside at 8:54am in 30deg drilling holes for a term strip in your express to turn it into an 800 b/c you couldn't get it quite right, and you don't want to wake your wife, cause she will surely think you are crazy.
Or out at 9:00 PM in -5 degrees to file the rough edges on your cake pan chassis (yes, I was doing that last night).
Or even worse, doing it inside, because you need to vaccuum about 50 1/2" pieces of PVC up anyways
User avatar
xtian
Posts: 7263
Joined: Mon Apr 19, 2010 8:15 pm
Location: Chico, CA
Contact:

Re: Top reasons you know your an "Amp Builder"

Post by xtian »

You get an inflated sense of self worth when explaining to people how "valves" work.

And/or you think less of people because they don't know how "valves" work.
I build and repair tube amps. http://amps.monkeymatic.com
User avatar
rp
Posts: 2528
Joined: Sun Apr 25, 2010 4:21 am
Location: Italy

Re: Top reasons you know your an "Amp Builder"

Post by rp »

Pretty much all applies to me, now I know I'm normal - or normal enough.

I just ordered an OT from RJ, I feel like on waiting on a hot date to arrive.
Post Reply