want 2 Rok JM signature tone board layout

[sunny]

Thanks Mark, and nice build bye the way!

Sounds great, I cant wait to hear some samples!!

Paul

[M Fowler]

Yeah about those sound samples, I've been meaning to set up a mixing station for about 5 years or so

Mark

[amplifiednation]

I've got a set of faceplates for that chassis but there are amp nation logos all over them!

If you want the design files give me a shout I'll help you get some plates made

T

[M Fowler]

Taylor I emailed you thanks.

[sunny]

Mark, do you have some kind of ''simple'' layout like this one for example https://tubeamparchive.com/download/file.php?id=30708 ?

It's a little blurry for me when i look at the schematic and the pictures
I am not a pro like most of the guys here. It would make it a lot easier for me it's hard to say what is going on underneath the boards.

Paul

[M Fowler]

Mark, do you have some kind of ''simple'' layout like this one for example https://tubeamparchive.com/download/file.php?id=30708 ?

It's a little blurry for me when i look at the schematic and the pictures
I am not a pro like most of the guys here. It would make it a lot easier for me it's hard to say what is going on underneath the boards.

Paul

I'm sorry I do not have a layout for you to go by.

I had to use the schematic and photos on my build.

[M Fowler]

Under the tone board is mostly ground connections to all the preamp cathode resistors/bypass caps.

The other connections could be done from the top if you wanted. I know I don't like wiring boards underneath like this, twice as hard in my opinion.

The PS board could be built differently too.

[M Fowler]

Added new faceplate looks better now.

[dorrisant]

Mark,

What were your voltages? I found some handwritten documentation that had some... Just curious if you know off-hand.

After your glorious comments I have to build this circuit. Good looking build!

Tony

[M Fowler]

Mark,

What were your voltages? I found some handwritten documentation that had some... Just curious if you know off-hand.

After your glorious comments I have to build this circuit. Good looking build!

Tony

Tony I will have to take voltages again and write them down and post.

[dorrisant]

Thanks Mark. You are a machine!!!

Tony

[beasleybodyshop]

I have been using my horribly meager layout skills to come up with a layout for this amp based on the photos in this thread and Aaron's schematic. Please forgive the squiggly lines, inkscape is a bitch to get smooth lines.

This layout is not complete, so use at your own risk! Any feedback for correctness would be fantastic.

[Aaron]

Nice work on the layout. It takes me about the same time drawing a layout as it does to build it!

Aaron

[beasleybodyshop]

thanks Aaron! Your schematic was invaluable. I wouldn't have been able to do this without it and Marks guidance.

[dorrisant]

Nice looking layout! What are you using to draw that up with?

Tony