Asteroid Layout
Moderators: pompeiisneaks, Colossal
Yes ---
I've seen the Doug Hammond Meteor circuit. I believe there is room for a little improvement. The Circuit and his site are currently dead links though.
Where does the "Voice" of this amp come from? The tone stack? The level of gain in each stage?
Where does the "Voice" of this amp come from? The tone stack? The level of gain in each stage?
Re: Asteroid Layout
No, they are 19.25"x7.25"x2.5oggidog wrote:Say, are the chassis dimensions the same as a Trainwreck chassis? Thanks.
I have 3 chassis right here.
Re: Yes ---
Boy that is a complicated question. It comes from the super beefy transformers, the gain stages, the power supply voltage and filtration, the NFB, the Marshally tone stack, the tube rectifier, the phase inverter, and the sheer power of the beast through a good 4X12" half stack.Tonewolf wrote:Where does the "Voice" of this amp come from? The tone stack? The level of gain in each stage?
Great things happen in a vacuum
Re: Yes ---
There is a site someone turned me onto just last week that has been archiving almost every website for the last 4 years or so. It's called "wayback machine" http://www.archive.org/web/web.php. Just fantastic!!!!!Tonewolf wrote:I've seen the Doug Hammond Meteor circuit. I believe there is room for a little improvement. The Circuit and his site are currently dead links though.
His old homepage:
http://web.archive.org/web/200310021919 ... d/doug.htm
Clip of his stompbox:
http://web.archive.org/web/200308231524 ... or_Jam.mp3
Hey Gearhead
That is cool to the third power dude! Thanks!!!
OK I like the clips but may change a few things. I'll let you guys and gals know how it goes in a new thread so I don't pirate this thread any more.
OK I like the clips but may change a few things. I'll let you guys and gals know how it goes in a new thread so I don't pirate this thread any more.
Re: Asteroid Layout
I notice an "Asteroid" is in the 'For Sale or Trade' area, with a link to some very good clear pictures. Might be the sort of thing we want to archive? I know I have already!
__________________________________________
Cheers and Beers.
Cheers and Beers.
- Noel Grassy
- Posts: 426
- Joined: Thu Feb 09, 2006 5:29 am
- Location: Vacuum Tube Valley-Cali
Re: Asteroid Layout
Whatever became of bnwtt's artwork? There's diddly on here now and I'm crushed. Did he take his toys & go home following that wimpy bitchfest with Funk a while ago? Dammit I even PM'd him back then to no avail... 
All excellent things are as difficult as they are rare__B Spinoza
Re: Asteroid Layout
which bias resistor do you use? 470 was to small for me.
Re: Asteroid Layout
I would be very gratefull if some lucky wind blew the schem and layout in my direction.
Someone has it ?
Someone has it ?
-
txbluesboy
- Posts: 387
- Joined: Mon Apr 02, 2007 3:52 pm
- Location: Dallas area
- Contact:
-
deiseldave
- Posts: 220
- Joined: Sat Feb 03, 2007 3:55 am
- Location: Leesburg, FL
Re: Asteroid Layout
Me three, please.
Re: Asteroid Layout
Here it is.
Now it's gone.
Now it's gone.
Last edited by galtjunk on Tue Jun 03, 2008 3:49 pm, edited 1 time in total.
-
deiseldave
- Posts: 220
- Joined: Sat Feb 03, 2007 3:55 am
- Location: Leesburg, FL
Re: Asteroid Layout
Thanks !!
Re: Asteroid Layout
Galtjunk,
I was asked to remove my layout from this thread some time ago. You should probably remove it from your post. Just FYI
Noel,
buddy, I respond to every PM on this board (and many others) and graciously send whatever is requested. So, your remark is surprising to me. I believe I've shared with you in the past as well. At least my wimpy (hmm, I thought it was rather aggressive and in your face not wimpy) bitchfest broke loose some pictures and additional info on the dumble for everyone in here and that was my intention. So, you're welcome for that as well. I spend hours drawing layouts for lots of different amps and spread them across the net for nada. What an ass am I huh? Or at least that is how you just depicted me in your post.
Et tu Brute?
I was asked to remove my layout from this thread some time ago. You should probably remove it from your post. Just FYI
Noel,
buddy, I respond to every PM on this board (and many others) and graciously send whatever is requested. So, your remark is surprising to me. I believe I've shared with you in the past as well. At least my wimpy (hmm, I thought it was rather aggressive and in your face not wimpy) bitchfest broke loose some pictures and additional info on the dumble for everyone in here and that was my intention. So, you're welcome for that as well. I spend hours drawing layouts for lots of different amps and spread them across the net for nada. What an ass am I huh? Or at least that is how you just depicted me in your post.
Great things happen in a vacuum