Fender 4x10 bassman cab plans

[M Fowler]

Cab plans for 1959 Fender 5f6 Bassman 4x10:

[amplifiednation]

I just built this. I will post pics, it was a real cool build

[overtone]

My girlfriend has asked that we have for four of these just as cabs for the living room!

[M Fowler]

If you decrease the size of the holes you could convert to a nice wine rack.

[bluesy]

.....the height doesn't add up. The 20 1/4" plus the two 3/4" add up to 24" high.
It shows 22 1/2" total height?

[bluesy]

20 1/4 plus 3/4 plus 3/4= 21.75. Not 22 1/2. Sorry.

[cbass]

If you decrease the size of the holes you could convert to a nice wine rack.

Put a trash bag in it and its a beer cooler

[overtone]

Bluesy, you need to factor in the 1/2 and 1/4 gaps to the rear rail.
I hope all the measurements add up because the everything is cut already.

Right now I am building a router table / finger joint sliding thingy. New territory for me.

If you stack the Pils bottles well I reckon you could get about five crates of beer in one of these and still use it. That's 480 bottles in all four, nearly enough for a party. Will invite the neighbors and let you know how it goes.

[ChrisM]

I just built this. I will post pics, it was a real cool build

Cool, looking forward to seeing this.

[bluesy]

.....maybe I should put my glasses on!


[quote="overtone"]Bluesy, you need to factor in the 1/2 and 1/4 gaps to the rear rail.

[bcmatt]

I used those plans to build a straight speaker cab. For some reason, I ended up making the dimensions about an inch bigger or so... maybe to use more wood? I don't know. I also didn't like the 10" speakers so I converted it to a 2x12. And I guess I didn't use old growth pine, but rather fir and purple-heart. Ya, so in the end it didn't end up being very close to the plans:
[IMG:640:480]http://i45.tinypic.com/14kxvfn.jpg[/img]

[crbowman]

My girlfriend has asked that we have for four of these just as cabs for the living room!

I think I'm in love with your girlfriend.

[amplifiednation]

Hey guys, I just finished this cabinet today. I used the plans on this thread, but we altered them to fit the Manzamp!!! Really cool project this build is tricky.

[IMG768]http://i817.photobucket.com/albums/zz97/amplifiednation/DSCN3957_zps3e6cf11b.jpg[/img]
[IMG768]http://i817.photobucket.com/albums/zz97/amplifiednation/DSCN3960_zpsf6a5eac3.jpg[/img]
[IMG768]http://i817.photobucket.com/albums/zz97/amplifiednation/DSCN3961_zps4e16c63e.jpg[/img]
[IMG768]http://i817.photobucket.com/albums/zz97/amplifiednation/DSCN3963_zps1b5e49d1.jpg[/img]

[LeftyStrat]

That looks awesome. Did you use baltic birch plywood or pine?

[amplifiednation]

That looks awesome. Did you use baltic birch plywood or pine?

Thanks man.

All baltic. I also changed the back panel to 0.5" thickness, it gave a much nicer edge to slightly roundover. I built the overall depth +0.25" to keep the clearance the same.