pacific transformers?

goodtone77 · Post by **goodtone77** » Tue Dec 13, 2005 3:07 am

Can we still order these from pacific? If so does anyone know how much they run?

rhinson · Post by **rhinson** » Tue Dec 13, 2005 3:12 am

hello, as far as i know you can still order them. the power is in the $90+ range and the output is like $78 i think. i posted the spec sheet many posts back in this forum. rh

Craig Reid · Post by **Craig Reid** » Tue Dec 13, 2005 3:25 pm

I ordered a set a month ago, so they are definitely available.

They are $177.44 total for both PT/OT. I don't remember the price for each.

Craig

goodtone77 · Post by **goodtone77** » Thu Dec 15, 2005 2:58 am

thanks did you just email them of how did you order them?

Craig Reid · Post by **Craig Reid** » Thu Dec 15, 2005 4:23 am

I just called them at 1-800-325-0501. I talked to Amy.

And BTW, I lied. I did have the cost per unit on file;

PT 25475 $98.29
OT 25525 $79.15

Mark · Post by **Mark** » Sat Dec 17, 2005 8:01 am

I sent an email to Pacific and told them I wanted two (240vac) power transformers and two output transformers I received no reply. I dare say my order wasn't big enough!

BluzMike · Post by **BluzMike** » Mon Dec 19, 2005 3:29 pm

Mark wrote:I sent an email to Pacific and told them I wanted two (240vac) power transformers and two output transformers I received no reply. I dare say my order wasn't big enough!

Same thing, Mark. I sent them an e-mail order for an export PT (230V primary) plus OT last week and did not receive an answer so far.
Due to excellent experiences of Funkaliciousgroove (thanks for sharing your insights, Brandon!) I ordered a chassis from Nik at Ceriatone.com with Pacific mounting holes (OT is slightly narrower than Heyboer's). Hope Pacific will deliver the matching trannies.

What about pooling orders, Mark? Anybody else? Maybe we can motivate Pacific through a bigger order.

doctord02 · Post by **doctord02** » Mon Dec 19, 2005 6:49 pm

It sounds like people that have telephoned have been more successful...

Snapcase · Post by **Snapcase** » Mon Dec 19, 2005 7:18 pm

Me too, no reply to e-mails

What about pooling orders, Mark? Anybody else? Maybe we can motivate Pacific through a bigger order.

Where are you from, BluzMike?

Mark · Post by **Mark** » Wed Dec 21, 2005 5:16 am

Dear BluzMike

Sure I'm all for pooling an order.

To contact me email me at the following address;

mark_a_abbott at yahoo dot com dot au

P.S. I noticed others have written their email address this way, I do hope it stops spam!

BluzMike · Post by **BluzMike** » Wed Dec 21, 2005 6:29 pm

Where are you from, BluzMike?[/quote]

I am living in Munich, Germany.
How about you?

DoctorD02: thanks for your suggestion. Sure, I could call them up, maybe best after the Christmas holidays.

Also, I just e-mailed Mark down under. Maybe there are more builders out there who want to join us in a Pacific order?

e-mail me: BluzMike AT gmx DOT net

BluzMike · Post by **BluzMike** » Fri Dec 23, 2005 1:59 pm

So far we have pooled 5 sets:

Export version(230V/240V) PT and OT:
2 sets Mark
2 sets myself

Domestic version (117V) PT + OT:
1 set Brandon (Funkaliciousgroove)

Anybody else interested in ordering from Pacific with us?

Omar · Post by **Omar** » Fri Dec 23, 2005 4:18 pm

BluzMike - You mentioned that OT mounting holes are slightly narrower. Do you have the dimensions on the mounting holes for both the OT and PT? I might be interested in a domestic set if I don't have do too much drilling to make it fit.

Omar

Snapcase · Post by **Snapcase** » Sat Dec 24, 2005 10:35 am

I am living in Munich, Germany.
How about you?

Madrid, Spain.

I need to think about it, the prize of the transformers set is nice compared to other brands, but importing stuff from USA to EU is highly charged and taxed due to UE protectionist tendencies. This could easily reach the 250€ range, depending on the shipment methods offered by Pacific. Insurance and shipment costs are also charged with VAT by UE customs, as well as the items.

A question about shipping. Being a single order will it be shipped to every single buyer, or just the bulk to you? This will increase the shipping costs even further...

BluzMike · Post by **BluzMike** » Tue Dec 27, 2005 11:25 am

Omar wrote:BluzMike - You mentioned that OT mounting holes are slightly narrower. Do you have the dimensions on the mounting holes for both the OT and PT? I might be interested in a domestic set if I don't have do too much drilling to make it fit.

Omar

The only difference in mounting holes is on the OT, where the distance between the holes on the two bell cover sides (center to center) of Pacific's is 2.25 instead of Heyboer's 2.125 (E on the Heyboer plan).
At the same time Pacific specifies 2.25 +/- .040, so their OT should even fit the Heyboer holes.

So welcome on board, Omar

I will check with Pacific and then come back to everybody interested so far before placing a final order in the second week of January.

Tube Amp Archive

pacific transformers?

pacific transformers?

Re: pacific transformers?

Re: pacific transformers?

Re: pacific transformers?

Re: pacific transformers?

Re: pacific transformers?

Pooling Pacific tranny set orders?

Re: pacific transformers?

Re: pacific transformers?

Yes to Pooling

Re: pacific transformers?

Pooling Pacific transformer orders

Re: pacific transformers?

Re: pacific transformers?

Re: pacific transformers?