Miles, you're gonna be running plates and screens <400V. You should be fine with the reduced screen resistor value and you can always add an additional series resistor coming from B+2 to the screen resistors if you need to take a bit more voltage off without affecting the voltages south of B+2.Reeltarded wrote:I decided to live with the 470R screenies for a few days so I can go ahead. I removed the obnoxiously paranoid 500R add-ons. Huge and in the way.
About to wire in the board. The rest is done.
In progress/in situ
Moderators: pompeiisneaks, Colossal
Re: In progress/in situ
- Reeltarded
- Posts: 10189
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: In progress/in situ
Good deal. The monster is almost breathing. Just waiting for a storm so I can fly my kite and get free energy. 
Re: In progress/in situ
Better take the Delorean Doc...Reeltarded wrote:Good deal. The monster is almost breathing. Just waiting for a storm so I can fly my kite and get free energy.
[img:300:300]http://media.comicvine.com/uploads/3/38 ... _large.jpg[/img]
- Reeltarded
- Posts: 10189
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: In progress/in situ
hahHh! My amp iszaboudtado 88mph!
I had to run out for fuses! (facepalm)
Control wires and it's an airplane. I always hate this part, twice in my life so far. I am not good at the transformers and power bits. (gulp)
-plugs in iron-
I had to run out for fuses! (facepalm)
Control wires and it's an airplane. I always hate this part, twice in my life so far. I am not good at the transformers and power bits. (gulp)
-plugs in iron-
Re: In progress/in situ
Waiting with baited breath...
Gonna be a killer amp - you know it.

Gonna be a killer amp - you know it.
Why Aye Man
Re: In progress/in situ
Just stick a penny in it!Reeltarded wrote:hahHh! My amp iszaboudtado 88mph!
I had to run out for fuses! (facepalm)
That's what Granddad used to do in the fuse box.
Of course their house burnt down a couple years later....
Tom
Don't let that smoke out!
Don't let that smoke out!
- Reeltarded
- Posts: 10189
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: In progress/in situ
hHaha! NOT!
Ok, here we go!
Ok, here we go!
- Reeltarded
- Posts: 10189
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: In progress/in situ
Had to run a spare amp out to a friend at a gig.
IT STARTED WITHOUT BLOWING UP!!! Only had time to get the tubes in and flip the switch before I left.
Bad news: motorboating. Not 'whump whump whump' but 'put put put' going to check filter grounds and beg for help and mercy.
HELP!! MERCY MERCY MERCY!! It's a fair layout but I through a couple curve in there between 2 amp styles.
HELP!! hahah happy it doesn't eat fuses.
IT STARTED WITHOUT BLOWING UP!!! Only had time to get the tubes in and flip the switch before I left.
Bad news: motorboating. Not 'whump whump whump' but 'put put put' going to check filter grounds and beg for help and mercy.
HELP!! MERCY MERCY MERCY!! It's a fair layout but I through a couple curve in there between 2 amp styles.
HELP!! hahah happy it doesn't eat fuses.