covers for unused Octal holes

[txbluesboy]

Somewhere I saw that someone had aluminum plates that could be used to cover the extra holes in a 100 watt chassis when building a 50 watt amp.
Anybody know who sells these?

[diagrammatiks]

mojotone.

[txbluesboy]

I looked in Mojo's catalog and cant find it. I hate to be a pain but do you know the part number?

[Randy Magee]

Weber has them too...

https://taweber.powweb.com/store/chassis/chord2.html

[Phil_S]

Try your local hardware store or Low Depot. They should have chrome snap-in hole covers (plumbing, for sinks). Not sure if pricing is better or worse than $5 from Weber plus postage or if the size will be right.

I just make my own and attach them to the inside with screws. That covers exterior appearance issues. You can just use a square bit of sheet metal. This is cheapest, quickest route. Cut with snips, drill two holes. You're done.

[txbluesboy]

Thanks everyone. WEBER thats it!!

[M Fowler]

http://www.mojotone.com/amp-parts/Chassis