Piher res.
Moderators: pompeiisneaks, Colossal
Re: Piher res.
Thanks for the heads up! I have a few of the larger ones (>1W) in lighter red that looks like your examples, but I think they're in really weird values. I did notice a slight improvement in tone when I've compared these I have to carbon comps (smoother, less grainy sounding).
- Reeltarded
- Posts: 10189
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: Piher res.
I never can tell what colors are what on the interweb.
What all values do you have?
What all values do you have?
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.
Re: Piher res.
I have quite a diverse range of values (in resistors, too!). Everything from low ohms (not 1-ohm though) to 10Meg. Most are in .5w and the little ones, which I assume are .25W. I have some larger, but it's a crap shoot on the values I have.
As this "hoard" was my resistor bank for projects over the last 15 years, stock is getting low on some of the common values (1Meg, 100K, 220K, 68K, 1K5, etc). PM me if you have a list and I'll see what I have.
As this "hoard" was my resistor bank for projects over the last 15 years, stock is getting low on some of the common values (1Meg, 100K, 220K, 68K, 1K5, etc). PM me if you have a list and I'll see what I have.