100mfd 500 volt axial

[txbluesboy]

Are there any actual 500 volt rated 100 or 80 mfd caps out there?

[VacuumVoodoo]

http://www.tubeampdoctor.com/en/shop_Ca ... acitor_741

[txbluesboy]

Thanks, do you know if they have a US distributor?

[ToneMerc]

Are there any actual 500 volt rated 100 or 80 mfd caps out there?

JJ's are available

http://www.tubesandmore.com/scripts/fox ... 2_JJ_AXIAL

TM

[M Fowler]

Thanks, do you know if they have a US distributor?

Terry you just order direct from TAD and they do have a dealer account as well.

Mark

[VacuumVoodoo]

TAD caps are custom made by F&T who don't carry 100uF/500V in their own standard catalog.
JJs are spec'd for max 70C operating temp vs 85C for TAD/F&T. This makes TADs operating lifetime significantly longer. Like an order of magnitude longer.
I am in (edit, insert NO) NO way affiliated with TAD or F&T, I just happen to have good experience of the product.

[txbluesboy]

Thank you all very much. This forum really is very helpful!!

[Reeltarded]

F&T very good.

[diagrammatiks]

I did not know that the TAD caps were rebranded F and T.

It seems that a lot of German suppliers get higher voltages to rebrand for their house brand.

Good to know.

[VacuumVoodoo]

F&T in their 500V product line has 82uF and 120uF but not 100uF. It was trivial task to make a 100uF branded for TAD. F&T make no secret of supplying branded products, they even ask for custom brand jobs on their website.

[diagrammatiks]

ya askjanfirst also has entire line of house branded caps at 550vdc.

sucks that there isn't an american supplier for those ratings.

[davent]

Justradios list a 100uF 600v axial.

http://www.justradios.com/orderform.html

For an arm and a leg Parts Connexion have Jensen 80 & 100uf 500v .

http://www.partsconnexion.com/capacitor ... axial.html

[diagrammatiks]

justradio stuff is rebranded chinese production...

the jensen stuff is good but for that much I'd rather just buy a kickass radial mount cap.

[overtone]

ya askjanfirst also has entire line of house branded caps at 550vdc...

and if I remember correctly he actually states that he has them made by F+T

[txbluesboy]

I went ahead and ordered from the Tube Amp Doctor, Thanks everyone!