and I forgot about the wire lol
Thanks on the tubes Steve! All whole!
Coax for the shield
Moderators: pompeiisneaks, Colossal
- Reeltarded
- Posts: 10189
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: Coax for the shield
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.
Re: Coax for the shield
Steve I like the video lots of kool stuff.
Mark
Mark
husky
I remember going to the original Apex with Bob Bradshaw. We would hang out for a while. Lots of fun !ApexJr. wrote:For those who can't make it to my warehouse
Here's a 2:47 tour...
http://www.youtube.com/watch?v=J6DNTYm7kWA
Steve
Re: Coax for the shield
Husky.....
In May of 2012 it will be 20 years I've been away from the
original Apex and on my own....
Bob Bradshaw -Custom Audio is still a customer and has been
down to the Torrance warehouse quite a bit.
Small world, Huh....
Steve
In May of 2012 it will be 20 years I've been away from the
original Apex and on my own....
Bob Bradshaw -Custom Audio is still a customer and has been
down to the Torrance warehouse quite a bit.
Small world, Huh....
Steve
- Reeltarded
- Posts: 10189
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: Coax for the shield
Fail! RG6 sucks to work with, and it din't work out so well.
EEEEEEE have howling with cascaded bright into normal on Marshall with gain past 5 on bright. Tried everything! Misery!
I have learned a valuable lesson though. I know what it is to take all the instability out of an amp, and be left with a very dead amp. Sounds generic where it use to ride a noisy edge.
Ehhh..
EEEEEEE have howling with cascaded bright into normal on Marshall with gain past 5 on bright. Tried everything! Misery!
I have learned a valuable lesson though. I know what it is to take all the instability out of an amp, and be left with a very dead amp. Sounds generic where it use to ride a noisy edge.
Ehhh..
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.