Board, PS, Relay boards ready. Picture works now!

[Tdale]

I'm starting to assemble as soon as I get the chassis ready...

Here is picture

Tommy

[Tdale]

Hmm. There was something wrong with the picture..but it should work now.

Tommy

[guittguy1]

That really makes Me want to build one! Got too many other projects waiting to be finished though.

[BobW]

Tommy, that's a great looking start, did you make your own boards and panel labels?

[BobW]

Tommy, that's a great looking start, did you make your own boards and panel labels?

[HiGain]

Nice!

Jake

[MarkB]

The wiring of the 100uF filter caps has me puzzled. Are they parallel wired? It looks like there's a resistor between the two ground leads - I must not be seeing something.

[Normster]

The wiring of the 100uF filter caps has me puzzled. Are they parallel wired? It looks like there's a resistor between the two ground leads - I must not be seeing something.

What you're not seeing is a wire that runs diagonally from positive of the right cap to negative of the left cap (under the board).

[MarkB]

The wiring of the 100uF filter caps has me puzzled. Are they parallel wired? It looks like there's a resistor between the two ground leads - I must not be seeing something.

What you're not seeing is a wire that runs diagonally from positive of the right cap to negative of the left cap (under the board).

I figured that had to be it.

[Tdale]

Yes, there is a diagonal wire under it.

I made the boards myself, and the panel labels too. The chassis is about to be finished, and I can't wait!!!

Tommy