Ampwares? good for parts?
Moderators: pompeiisneaks, Colossal
- Ron Worley
- Posts: 908
- Joined: Mon Dec 24, 2007 8:21 pm
- Location: Keller, TX
Re: Ampwares? good for parts?
Here's the Ampwares part I spoke of...
Ron
Ron
You do not have the required permissions to view the files attached to this post.
- Ron Worley
- Posts: 908
- Joined: Mon Dec 24, 2007 8:21 pm
- Location: Keller, TX
Re: Ampwares? good for parts?
Here are some that I stumbled upon via a PM'd lead from Fishy here on the forum...
I bought all that they had. They fit perfectly- as you can see, they need to be 1.5" long total to work- the Mouser supplied Keystone and Amphenol lugs are both about 1/4" too short to fit around a PEC, AB or Clarostat pot casings.
Ron
I bought all that they had. They fit perfectly- as you can see, they need to be 1.5" long total to work- the Mouser supplied Keystone and Amphenol lugs are both about 1/4" too short to fit around a PEC, AB or Clarostat pot casings.
Ron
You do not have the required permissions to view the files attached to this post.
Last edited by Ron Worley on Tue Mar 18, 2008 8:23 pm, edited 1 time in total.
Re: Ampwares? good for parts?
I've set up a vendors page on the wiki with Preferred and Non-preferred Vendors:
http://ampgarage.com/wiki/Vendors
Thanks,
Omar
http://ampgarage.com/wiki/Vendors
Thanks,
Omar
Tonegeek wrote:We need a sticky posted with the suppliers to beware of. Nothing harsh but maybe a few testimonials so that people get the picture. Ampwares is the one I have heard about the most, but have no personal experience with (due to the bad press, I stayed away)
Or coming at it another way, there could be a sticky of recommended suppliers. If you don't see Ampwares on it then you know to do some searching or ask ....
Tone by misadventure
-
guitarsnguns04
- Posts: 286
- Joined: Tue Nov 13, 2007 10:49 pm
Re: Ampwares? good for parts?
thanks Omar.
WARNING - ampwares email adress is not valid
Another very bad experience for Ampwares : in January I have placed an order with them to make myself a brown Vibroverb clone ; at the time they were the only one to offer some of the parts (for instance those 350K-70K tap pots) ; since the confirmation order, I got nothing, and no anwers to my emails, because their several email adresses (ffg@ampwares.com, webmaster@ampwares.com) don't seem to be valid anymore.
I kne from the forums they were slow in delivery but now it looks more like roberry, they took my money and you can't reach them either by phone or email !
I kne from the forums they were slow in delivery but now it looks more like roberry, they took my money and you can't reach them either by phone or email !
-
guitarsnguns04
- Posts: 286
- Joined: Tue Nov 13, 2007 10:49 pm
Re: Ampwares? good for parts?
UPDATE>>>>>>>still no parts !!!!!
Re: Ampwares? good for parts?
I made the same mistake. I went as far as calling my credit card comp. to halt payment. Two days later I received the shipment. I'll never order from them again.
Rut
Rut
-
guitarsnguns04
- Posts: 286
- Joined: Tue Nov 13, 2007 10:49 pm
Re: Ampwares? good for parts?
I have to be fair...I got my parts today!! Well all but 2 150k res..but he did substitute from 1/2 w to 1w..so I guee I got it all. Long story short..
from order placed to parts in hand...30days exactly!
from order placed to parts in hand...30days exactly!
Re: Ampwares? good for parts?
That's a bit of luck, guitarsnguns04, but my order is now more than two month old, and their email adresses are no longer valid it seems, so I am very afraid I will never get anything
Re: Ampwares? good for parts?
Yup.. I'm still waiting on a book ordered in November as a Christmas present.
-
guitarsnguns04
- Posts: 286
- Joined: Tue Nov 13, 2007 10:49 pm
Re: Ampwares? good for parts?
I learned my lesson but I got the parts as well..last time for me though! I am trying out some other suppliers.
Re: Ampwares? good for parts?
I was forced to order from Ampwares several times. I even returned an item and had to wait AGAIN for the replacement. Here's the tip: I had my girlfriend call really early in the morning and she spoke to the guy who runs the one man operation. She got through on two separate occasions by calling very early, and it did speed things up.
Re: Ampwares? good for parts?
Doug, from Hoffmanamps.com always ships same day. Unless you order past 430 pm.
Dave
Dave
Instructions...I don't need no stinkin instructions
Re: Ampwares? good for parts?
Doug is the man!joebob wrote:Doug, from Hoffmanamps.com always ships same day. Unless you order past 430 pm.
Dave