JTM45/100 clone modded
Moderators: pompeiisneaks, Colossal
JTM45/100 clone modded
Hi Guys, here is a clip from my JTM45/100 clone i have modded.
http://soundclick.com/share.cfm?id=11221615
Cheers
Nigel
http://soundclick.com/share.cfm?id=11221615
Cheers
Nigel
Re: JTM45/100 clone modded
why do you want to mod perfection? these are perfect, with the possible exception of being too bassy
www.myspace.com/20bonesband
www.myspace.com/prostitutes
Express, Comet 60, Jtm45, jtm50, jmp50, 6g6b, vibroverb, champster, alessandro rottweiler
4x12" w/H75s
www.myspace.com/prostitutes
Express, Comet 60, Jtm45, jtm50, jmp50, 6g6b, vibroverb, champster, alessandro rottweiler
4x12" w/H75s
-
Bob Simpson
- Posts: 299
- Joined: Fri Sep 07, 2007 5:43 pm
- Location: Lakewood, CO
Perfect!
I loved the tone and sustain, Nigel.
I'd build a JTM just so I could mod it to that...
Details of the guitar, recording or mods, please?
Bob
I'd build a JTM just so I could mod it to that...
Details of the guitar, recording or mods, please?
Bob
Please understand that IMO an answer to this question is of no practical relevance at all. - Max
Re: JTM45/100 clone modded
Cheers guys thanks for your great feedback
Guitar Tokai ls-150 GT, speakers g12h30 55hz, i done this mod about 6 months ago & haven't opened the amp since, but it was something like my #36 mod.
Here is another clip this time i have cranked the amp a bit.
http://soundclick.com/share.cfm?id=11225748
Nigel
Guitar Tokai ls-150 GT, speakers g12h30 55hz, i done this mod about 6 months ago & haven't opened the amp since, but it was something like my #36 mod.
Here is another clip this time i have cranked the amp a bit.
http://soundclick.com/share.cfm?id=11225748
Nigel
-
VintageCharlie
- Posts: 156
- Joined: Thu Oct 07, 2010 7:56 pm
- Location: Latvia
Re: JTM45/100 clone modded
Sounds nice!
Seems to have more gain and less bass than the stock circuit? How did you handle the ghosting (if that's not a trade secret)?
I love my 45/100, but i'm not fond of the ghosting. Still, i'm not prepared to raise the filtering, as the amp sounds great otherwise.
Seems to have more gain and less bass than the stock circuit? How did you handle the ghosting (if that's not a trade secret)?
I love my 45/100, but i'm not fond of the ghosting. Still, i'm not prepared to raise the filtering, as the amp sounds great otherwise.
Re: JTM45/100 clone modded
Thanks CharlieVintageCharlie wrote:Sounds nice!
Seems to have more gain and less bass than the stock circuit? How did you handle the ghosting (if that's not a trade secret)?
I love my 45/100, but i'm not fond of the ghosting. Still, i'm not prepared to raise the filtering, as the amp sounds great otherwise.
Cheers
Nigel
-
VintageCharlie
- Posts: 156
- Joined: Thu Oct 07, 2010 7:56 pm
- Location: Latvia
Re: JTM45/100 clone modded
Thanks for the tip! There's only one NOS filter cap in my build (a 32uF@450v Erie at the preamp), the rest are new RIFA's. Will have to try to replace the NOS one, which might be the trouble-maker. It's funny - some people say they never had ghosting problems with these amps, but some seem to fight it forever without successfully finding neither the cause nor the remedy.
Re: JTM45/100 clone modded
No probs, best to change one at a time & see if you can find the bad one, how loud do you turn your amp up?VintageCharlie wrote:Thanks for the tip! There's only one NOS filter cap in my build (a 32uF@450v Erie at the preamp), the rest are new RIFA's. Will have to try to replace the NOS one, which might be the trouble-maker. It's funny - some people say they never had ghosting problems with these amps, but some seem to fight it forever without successfully finding neither the cause nor the remedy.
Nigel
-
VintageCharlie
- Posts: 156
- Joined: Thu Oct 07, 2010 7:56 pm
- Location: Latvia
Re: JTM45/100 clone modded
I run it through a hotplate on -8 or -12 db and i use it between about 5-6 for clean/semi-clean tones and then various degrees of dirt up to 10 (Hi bright channel). I usually back up a bit from full blast, as at some point there is just too much stuff going on (great for solos though). I feel like 7-8 is a "sweet spot", as i can get nice cleans when playing gently, but i can get it really nasty, if i dig in hard - great dynamics in that spot. Btw., i don't feel like the ghosting increases with volume - at about 6 i hear it and it doesn't get much worse at 10.
Re: JTM45/100 clone modded
7-8 is about right, whats it like without the hotplate?VintageCharlie wrote:I run it through a hotplate on -8 or -12 db and i use it between about 5-6 for clean/semi-clean tones and then various degrees of dirt up to 10 (Hi bright channel). I usually back up a bit from full blast, as at some point there is just too much stuff going on (great for solos though). I feel like 7-8 is a "sweet spot", as i can get nice cleans when playing gently, but i can get it really nasty, if i dig in hard - great dynamics in that spot. Btw., i don't feel like the ghosting increases with volume - at about 6 i hear it and it doesn't get much worse at 10.
-
VintageCharlie
- Posts: 156
- Joined: Thu Oct 07, 2010 7:56 pm
- Location: Latvia
Re: JTM45/100 clone modded
I have a 4x12 cab, but i have only 2x g12H's in there right now, haven't hooked up the other two that are ready to be put in yet - hence i haven't tried it without the hot-plate (at -4db as minimum). What i did try was pulling two tubes and run it this way without the hot plate. The ghosting was still there - so it's not the attenuators impact.
Sorry for bringing this issue into your thread, which was about your modded 45/100! I didn't want to hijack it. I'll make a new trhead for this, as winter holidays are close and i might get some time to try to get rid of the ghosting and it seems like this is a good place to ask for advice.
Sorry for bringing this issue into your thread, which was about your modded 45/100! I didn't want to hijack it. I'll make a new trhead for this, as winter holidays are close and i might get some time to try to get rid of the ghosting and it seems like this is a good place to ask for advice.