Moderators: pompeiisneaks, Colossal
Hit me up w/ a PM, as I'll probably do the Marshall maybe w/o the trem. I thought I knew my Marshall schematics pretty well but never saw the 1930. Might just do it as another little open hifi style like my 5C1 seeing as I only need room for 3 tubes.jon wrote:If you are still interested I will be happy to forward you all my information, which is considerable) and my layout taken from a real amp.
Yes, it is overshadowed by its larger cousins. I believe they were only sold through the mail - from a Marshall catalog or something like that.I thought I knew my Marshall schematics pretty well but never saw the 1930.
10thTx wrote:Pin out on 6BM8 and 6GW8 is different.
I built a HoSo56 with 6BM8's. Nice amp. Very touch sensitive with good harmonics. It was about 7-9 watts. Geezer came up with the HoSo56.
Here is a version that I drew up for you with 6GW8's. Not sure I drew the pinout correct? And I'm not sure what value cathode resistor you'd need? But hopefully you get the idea.
with respect, 10thtx
Did you really just draw this up for this post! Thanks! I'm curious why the choice the forgo the built in triode section and use an extra PI here?10thTx wrote:Here is a version that I drew up for you with 6GW8's. Not sure I drew the pinout correct? And I'm not sure what value cathode resistor you'd need? But hopefully you get the idea.
You're welcome! No big deal. I just grabbed an editable schematic and edited it. Just took a few minutes.10thTx, dude you are one of the most helpful dudes ive seen here. Offering time, which for me trying to draw a schemo, is considerable.
Hat off.
