Caution- Newb Alert - Transformer Help

[bmcash]

Hi Everyone. Just as the title says, I graduated myself from pedal building to amp building. I chose a '67 Marshall plexi style kit from Ceriatone without the transformers and sourced the transformers as a bundle from triodeletronics (ClassicTone). I have the board populated and the hardware installed. Whilst working on the board I began to examine / study the wiring for the transformers. Well, it would have been easier if the wire colors matched, but that's where the fun begins. I have attached a figure of the power transformer and the layout ceriatone has provided. Could anyone please provide help on matching the colors so that I do not place the wrong wires in the wrong place? Any help would be appreciated. For examples, which two wires would be used as the heater wires?

http://www.ceriatone.com/images/layoutP ... uper-L.jpg

http://www.classictone.net/40-18024.pdf

Thanks in advance for any help provided!

B$

[xtian]

Your heater wires are the 6.3v set.
HT wires are the 350v set (yellow center tap).
98v set for bias.

[martin manning]

...

[bmcash]

Thanks man for the response and the detailed picture! It helps more than you realize. I am in the US, so I will not be using the 220 or 240. What do people typically do with the unused wire taps? Insulate them with heat shrink wrap and fold neatly?

[M Fowler]

How did you decide which version of the 100w plexi to make?

Slight differences between them, but Nick posted all the various models which is nice.

[bmcash]

I did a lot of research on youtube listening to sound clips. I did not wanr a late sixties as they are a little bright; however, it is still on my build list. To me, the 67 us a little more fender like but yet retains some superbass properties as well. Just my take...

[Reeltarded]

The difference is mostly gnarrrr vs burrrrang. Yeah. Technical terms.