Fender 6G14-A Showman Clone
Moderators: pompeiisneaks, Colossal
-
lljsullins
- Posts: 1
- Joined: Tue Jul 23, 2019 3:06 am
Fender 6G14-A Showman Clone
Anyone here ever built a 6G14-A clone? I'm looking to build this monster with a 6G15 reverb tank. Thanks!
-
Stevem
- Posts: 5144
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
Re: Fender 6G14-A Showman Clone
Your gonna find the the first filter node and its parallel 600 volt 20 uf filters a bit of a problem!
Your likely going to need to use series 80 to 100 uf 350 to 500 volt filters each of which is paralleld with a 220k 1 watt resistor.
Also be sure to keep the output side / end of the reverb tank atleast 10 inches away horizontally and 5 inches away vertically from the power transformer otherwise you will have a large amount of hum when you turn up the reverb!
Your likely going to need to use series 80 to 100 uf 350 to 500 volt filters each of which is paralleld with a 220k 1 watt resistor.
Also be sure to keep the output side / end of the reverb tank atleast 10 inches away horizontally and 5 inches away vertically from the power transformer otherwise you will have a large amount of hum when you turn up the reverb!
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!