Looking for some transformer specs

[alnight]

Hey guys. I've got a gutted Marshall TSL60 that a buddy want's me to build an ODS type amp in. I'm looking for a road map of which pin is what on these transformers. I have been searching the net for a few days and haven't come up with anything particularly useful so far. Guess I haven't found the right place to look yet.

They are Drakes. The PT is a TXMA-00067. The OT is a TXOP-00002. If anyone can point me the way I'd appreciate it.

[Roe]

https://www.tubeampdoctor.com/en/mains- ... m2000?c=0v


Lamiantion 3 3/4", Stack 2 3/8"

Mounting is on 79x64mm

Primary: #700292
0V #2
117V #5

0V #8
117V #11

Secondary:
360V@430mA #14
0V #16

21V@150mA White
0V Black
21V White

3,15V@8A #18
0V #24
3,1V #21



https://www.tubeampdoctor.com/en/output ... 00-etc?c=0

Impedance ca. 3.3k p-p

Lamination size: 3 ¾"
Stacking: 1 ½"

Mounting on 3 1/8" x 2 ½"

....


Primary:
A1 #4
B+ #2
A2 #7

Secondary:
16 Ohms #14
8 Ohms #16
4 Ohms #21

[Roe]

https://www.banzaimusic.com/Transformer ... M50PN.html

Direct replacement Power Transformer. Application: Marshall JCM900 and JCM2000 50W Models like 2500, 2501, 4500, 4501, DSL50, TSL60, TSL601, TSL602. and also used in the 9100 power amp. Upgrade for the METXMA00067. primary for 115/230V
...

Primary: 0V #14
115V #13

0V #11
115V #10

Primary: #70005
0V #13
117V #12

0V #10
117V #9

Secondary:
340V@0.4A #2
0V #3

21V@250mA Red
0V Black
21V Red

3,15V@5.5A #4
0V #7
3,15V #5

[alnight]

Thanks guys! That should help me keep the smoke inside the wires.