Buffered effects loop schematic. Please?

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

Post Reply
spankenstrat
Posts: 8
Joined: Fri Jan 12, 2007 7:11 pm

Buffered effects loop schematic. Please?

Post by spankenstrat »

I am thinking about adding one to a 2204/EL-84 project, but can't seem to find some schematics to go off. I'd like to look at the KOC Ultimate, but can't cough up $100.00 for the book right now. I anyone would be so kind as to send me some schematics that would be great!

the_sargents (at) isp (dot) com
User avatar
statorvane
Posts: 568
Joined: Thu May 11, 2006 3:28 pm
Location: Upstate New York

Re: Buffered effects loop schematic. Please?

Post by statorvane »

Well, there are several schematics over at the Blue Guitar http://blueguitar.org/schems.htm#BlueGuitAmp. There is a serial loop, specifically for a JCM 800 2203/2204 amplifier. I believe it uses a 12AU7. Look under ther Mods section for Marshall. Should be able to slide this between any 2204 preamp and poweramp.
User avatar
brownnote
Posts: 287
Joined: Wed Mar 01, 2006 4:00 pm
Location: SF/SAC, CA USA
Contact:

Re: Buffered effects loop schematic. Please?

Post by brownnote »

Here's another option:
http://ironsounds.com/
Remember kids...Always adjust for minimum smoke!

D'Lite Kits: http://store.bnamp.com/dlitekits.html
drz400
Posts: 509
Joined: Mon Nov 06, 2006 4:53 pm

Re: Buffered effects loop schematic. Please?

Post by drz400 »

SS loop just dont have the headroom a tube does for the recovery if put in front of the phase inverter. They are fine for a send and a mixer return but there is nothing like a tube for the return gain.
Post Reply