Vox AC15 Power Supply help

[fabiomayo]

Hi everyone.

While waiting for the parts for my Dumble rebuild I got restless

I've drawn this schematic for a AC15 with a Top Boost and a EF86 channel.
Nothing new, I know... However, being such I newbie I am not able to
properly design a power supply. Can anyone help me, please, and check
what I've drawn (which I'm pretty sure is all wrong)?

[IMG722]http://i15.photobucket.com/albums/a397/ ... AC15v2.gif[/img]

[IMG696]http://i15.photobucket.com/albums/a397/ ... DC30v2.gif[/img]

The first one is direct from the AC15 schems, the second one include
a few DC30 tweaks, as more filtering, 6-pos brilliance sw, different
taper and value pots, caps value...

A few questions:

1) Filtering. 'Vintage' or 'modern' amount?
2) Caps on pF range. Silver mica, ceramic or what?
3) Rectifier. EZ81, 5AR4, other? Diodes?

Thanks for your time!

[fabiomayo]

By the way, someone over the Plexi Palace caught my attention to the
bass pot to ground resistor being wrong, it's a 10k not a 100k. I'll correct
it later...

[klingo]

you're right
and Rocket goes down to 1k (but using a 500pf cap for treble)

i like the mica stuff in the pf area (if you could have good one)

i tend to prefer the polystyrene if your valves are above the chassis (caliente el sol)

these are my liking so you have to try & keep the stuff your ears like

forgive me if you could for bad english &patati&patata...

[fabiomayo]

Thanks for your comments.

I updated the files but for some reason it ain't working.

I'll repost it later...

Anyone else have any opinions?