Laney AOR 100 Coupling Capacitor Value
Moderators: pompeiisneaks, Colossal
Laney AOR 100 Coupling Capacitor Value
The ceramic Capacitor in c20 was bent over and sort of melted into the resistor next to it (R39) and the capacitor's insulation was falling off so I thought I would swap that out while I was doing all the electrolytic capacitors. I couldn't read the value on the existing component. The schematic lists a 47pf capacitor for c20. The larger ceramic capacitor is what was in that location physically. The capacitor on the right is the 47pf capacitor I got for a replacement. Now looking at it out I see 47 N. Is that nanofarad? Should I get a 47nf or put in what the schematic says?
You do not have the required permissions to view the files attached to this post.
-
Olomert Brever
- Posts: 24
- Joined: Mon Jun 02, 2025 8:25 pm
- Location: Nashville
Re: Laney AOR 100 Coupling Capacitor Value
47nF would mute the signal there. Is this the model with an impedance selector switch or does it have discreet speaker outs for each impedance? I have my own ripped schem of one here somewhere but IIRC the two are different.
You only YOLO once.
Re: Laney AOR 100 Coupling Capacitor Value
I suspect "N" is a tolerance value, not meant to be "nano".
I build and repair tube amps. http://amps.monkeymatic.com
-
Stevem
- Posts: 5144
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
1 others liked this
Re: Laney AOR 100 Coupling Capacitor Value
Some info.
You do not have the required permissions to view the files attached to this post.
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Re: Laney AOR 100 Coupling Capacitor Value
c20 is 47pf snubber
www.myspace.com/20bonesband
www.myspace.com/prostitutes
Express, Comet 60, Jtm45, jtm50, jmp50, 6g6b, vibroverb, champster, alessandro rottweiler
4x12" w/H75s
www.myspace.com/prostitutes
Express, Comet 60, Jtm45, jtm50, jmp50, 6g6b, vibroverb, champster, alessandro rottweiler
4x12" w/H75s
Re: Laney AOR 100 Coupling Capacitor Value
Thanks everyone for the input. I went with the 47pf.
This one has a selector switch.Olomert Brever wrote: ↑Tue Jul 29, 2025 12:29 am 47nF would mute the signal there. Is this the model with an impedance selector switch or does it have discreet speaker outs for each impedance? I have my own ripped schem of one here somewhere but IIRC the two are different.