Help . I have vision issues and have a fuse blowing
Moderators: pompeiisneaks, Colossal
Help . I have vision issues and have a fuse blowing
I have a VHT D50 I was going to bias on the scope and using the internal signal generator I accidentally let the other ground touch the chassis. The .5 amp fuse now blows even with the tube out . Where should I start ? The last power tube made a crackle , bur I'm not sure to start at the rectification area or where .
You do not have the required permissions to view the files attached to this post.
-
Stevem
- Posts: 5144
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
Re: Help . I have vision issues and have a fuse blowing
Do you have additional fuses?
If so remove both output tubes, install a new fuse then power the amp up and see if a new fuse blows.
If so remove both output tubes, install a new fuse then power the amp up and see if a new fuse blows.
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!