deluxe reverb II volume/switching pot wiring

[DSones]

I've attached a copy of the deluxe reverb II schematic for the volume/channel switching pot. Does anyone know how I would wire a modern day volume/pull switch DPDT to be equivalent?

[martin manning]

Like this. Use one side of the DPDT or parallel them together.

[maxkracht]

If I am understanding both of your posts correctly, you want this:

https://www.tubesandmore.com/products/p ... ushing-lug

or this if you want a 24mm pot:

https://www.tubesandmore.com/products/p ... shing-dpdt

You can buy a regular 1M cts pot and swap the wafers with the 250k switched pot and use the 250k wafer for treble or bass.

Center lug would go to ground on the 16mm pot, common goes to ground on the cts