Mercury Magnetics Transformer Wiring Question

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

Post Reply
newAmpBuilder
Posts: 8
Joined: Wed Mar 02, 2022 6:30 pm

Mercury Magnetics Transformer Wiring Question

Post by newAmpBuilder »

Newbie technical question. I'm replacing the power transformer in my Ceriatone OTS 50 with a Mercury Magnetics CER-OTS550-P and don't know what to do with wiring the 60V bias supply. There are two gray leads. I don't know whether to float one end or ground it and don't want to blow anything up. I attached the Wiring diagram from Mercury. Any help is greatly appreciated!
You do not have the required permissions to view the files attached to this post.
Top
sluckey
Posts: 3528
Joined: Sun Jul 22, 2007 7:48 pm
Location: Mobile, AL
Contact:
Contact sluckey

Re: Mercury Magnetics Transformer Wiring Question

Post by sluckey »

Wire it the same as your ceriatone PT.
Top
newAmpBuilder
Posts: 8
Joined: Wed Mar 02, 2022 6:30 pm

Re: Mercury Magnetics Transformer Wiring Question

Post by newAmpBuilder »

sluckey wrote: ↑Sat Apr 01, 2023 1:25 pm Wire it the same as your ceriatone PT.
OK so one lead goes to ground then. Thanks!
Top
Post Reply

Return to “Technical Discussion”