selloutrr wrote:fender has a history of making mistakes.
More then once they have cut the leads on capacitors a 1/4" to short before measuring the turret spacing. Since they are useless they just dumped them in the trash.
The new PCB amps are just sad in the quality control department. I coulod almost make a living on resoldering boards and fixing cold solder points that cause intermitant problems.
banging my head on this one
Moderators: pompeiisneaks, Colossal
Re: banging my head on this one
1+ Sometimes there's so little solder on the board-mounted sockets that they quickly break and become intermittent. There may as well be none!