Vox Reverb Unit schematic

[fopoman]

just wondering if some one has a copy of the schematic. I know its kinda similar to an AC4.

thanks folks,
Nathan

[Structo]

Is this a stand alone reverb unit?

I see an AC4 amp at Schematic Heaven but nothing like you ask about.

[fopoman]

yeah... the reverb unit.

thanks

[UR12]

here ya go

http://www.kbapps.com/audio/schematics/ ... b6g15.html

[Sonny ReVerb]

The OP said Vox, not Fender. Like this: http://www.voxshowroom.com/uk/misc/reverb.html

[UR12]

The OP said Vox, not Fender. Like this: http://www.voxshowroom.com/uk/misc/reverb.html

Sorry I just saw "standalone" and thought fender

[Bear]

I just tried a quick look for the Matchless outboard reverb schematic with no luck. Pretty rare bird as far as I can tell.

[Kagliostro]

I know there is a reverb schematic from Vox

a version of reverb to insert in an existing amp

But I've never seen that schematic or a Vox stand alone reverb schematic

here there are some Vox AC30 + reverb schematics

http://www.voxamps.com/support/circuits/

one is this

http://www.voxamps.com/downloads/circuits/ac301978.jpg

Sorry no more info for you

Kagliostro

[rhinson]

just wondering if some one has a copy of the schematic. I know its kinda similar to an AC4.

thanks folks,
Nathan

it's actually not real similar to an ac4. i've got the schematics (i bought the big vox book last yr and got the entire schematic files too---good stuff). it uses 1/2 12ax7 as a gain stage x 2 (2 ch. inputs), a 12au7 to drive the tank, 1/2 12ax7 as the recovery/mixer/buffer at the end. also a little ez80 rect tube used as a 1/2 wave (i'd use a fender trannie and just use a ss here). rh

[txbluesboy]

Is the 12au7 driving the tank push-pull? If so what impedence transformer would you use?

[electrocutioner]

rhinson, can you scan it and post it here?!

[Kagliostro]

May be this is OT

does someone has never seen the Vox Reverb schematic to be add to an existing amp ?

I know it exist and I'm VERY interested about it

can someone give help ?

THANKS

Kagliostro

[rhinson]

rhinson, can you scan it and post it here?!

i don't have a scanner, and the pages are big, folded pages (nice)---i would have to scan in partials and you guys would have to print them out and tape together. i'll see if i can do it at my place of work. btw, i also have the schematic for the "add on" unit the guy below was asking about as well. rh

[Cornelius]

If you have a reasonable good digital camera, it's easy to make a good repro, which doesn't need to be taped together...

Good light, a camera stand, and set the camera on timer should provide a good sharp copy.

[skeezbo]

Kagliostro
I think I remember seeing something like this in the Aspen Pittman book from many years ago. I'll see if I can find my copy. I have a scanner.

Skeez