OT for D-lite

gsb · Post by **gsb** » Sun May 27, 2007 1:56 am

I'm new here and I have some questions about D-lite. I`m coming
from Slovenija-Europa and my English is not so good. I have build
some Fender clones with EL84 output section ,and they work well.
What OT must be used ? I would like to use one from ALLEN AMPS
that is beffier ,with option to use 6v6 or 6l6 ? Can I use some standard
Fender OT for 6l6 ? I use as PT always toroid ,what is maximum voltage
for D-lite? Guitar is strat with Eric Clapton mod.(self made) so what version will be optimal (HRM ? ) Thanks for help

odourboy · Post by **odourboy** » Sun May 27, 2007 2:33 am

FWIW, I used Allen transformers exclusively in my 6L6 D-Clone build. (Basically, Bassman replacement stuff: TP40 power, TO60 output and TRCH choke.) This is NOT a D-Lite kit though... it was a build from scratch. I wouldn't even mention this except I'm not sure homw many others in the forum have used stuff from Allen. I can say that the transformers come well documented, they seem to work well and I haven't had any trouble with them, but due to my lack of experience with different 'iron', I can not say if they are your BEST choice.

mlp-mx6 · Post by **mlp-mx6** » Sun May 27, 2007 11:10 am

+1 for quality iron from David Allen!!!

Buschman · Post by **Buschman** » Sun May 27, 2007 9:02 pm

I used a Fender Hot Rod Deluxe OT so I could have a 4 & 8 ohm tap. I think it sounds very good & was not very expensive.

Drumslinger · Post by **Drumslinger** » Mon May 28, 2007 1:07 am

+1 on the OTs offered by Dave Allen. Good Stuff!!

gsb · Post by **gsb** » Mon May 28, 2007 2:27 am

I have contacted David Allen for OT ;but he only deliver in Usa and
Canada.I must find another way to buy OT from Allen.

brownnote · Post by **brownnote** » Mon May 28, 2007 8:12 am

FYI:
We have 4K and 8k OT's available for the D'Lite, and we ship International via EMS.

gsb · Post by **gsb** » Fri Jun 01, 2007 1:25 am

Thanks for answer.What are prices for 8 or 4 k OT. Im thinkig
to use 4K with option to use 6V6 or 6L6 tubes and build as
non HRM or non HRM version with effect loop ,but with power
section from D-lite ?

gsb · Post by **gsb** » Sat Jun 16, 2007 3:26 am

I have found a VOX OT with RA 3.8 k and 4-8-16 ohm windings.
Can i use it for dumble project with 6v6 or 6l6 tubes?

skyboltone · Post by **skyboltone** » Sun Jun 17, 2007 4:48 pm

gsb wrote:I have found a VOX OT with RA 3.8 k and 4-8-16 ohm windings.
Can i use it for dumble project with 6v6 or 6l6 tubes?

Yes. Sounds like a nice find.

Tube Amp Archive

OT for D-lite

OT for D-lite

Re: OT for D-lite

Re: OT for D-lite

Re: OT for D-lite

Re: OT for D-lite

OT fom David Allen

Re: OT for D-lite

ot

Re: OT for D-lite

Re: OT for D-lite