Wiring relays

Overdrive Special, Steel String Singer, Dumbleland, Odyssey, Winterland, etc. -
Members Only

Moderators: pompeiisneaks, Colossal

Post Reply
JamesO
Posts: 156
Joined: Thu Mar 29, 2007 10:32 pm

Wiring relays

Post by JamesO »

I've finally made it to the relay point of this bluesmaster build with Brandon's chassis and board set. I ran a few searches and had trouble coming up with information. If anyone knows of any threads that deal with reading the relay section of schematics, working with Brandon's relay boards, etc, would you mind passing them on?
Guitarman18
Posts: 454
Joined: Tue Sep 04, 2007 9:32 pm
Location: UK

Re: Wiring relays

Post by Guitarman18 »

JamesO wrote:
I've finally made it to the relay point of this bluesmaster build with Brandon's chassis and board set. I ran a few searches and had trouble coming up with information. If anyone knows of any threads that deal with reading the relay section of schematics, working with Brandon's relay boards, etc, would you mind passing them on?

I was in the same situation a while back and found this thread to be really helpful.

https://tubeamparchive.com/viewtopic.ph ... c&start=15


Sitting down with a relay and batteries was the most useful thing I did, to get my head around relays (as mentioned by Brandon in the post, I believe)

Best of luck.

Cheers, Paul.
User avatar
ic-racer
Posts: 1318
Joined: Tue Dec 18, 2007 2:24 pm

Re: Wiring relays

Post by ic-racer »

70s amps, NON-HRM amps, and HRM amps all have slightly different relay wiring.

Search for schematics for #40 f, #124 and ODS-102-HRM.pdf to see the three different wirings. A Bluesmaster with "Megaboost" will also have a slightly different wiring also.
Post Reply