I was thinking of this cable from mouser for the footswitch, 566-8445-100
Link: http://www.mouser.com/Search/Refine.asp ... _Wildcards
Does this look right to you guys? Does anyone have another source for 5 connector cable?
Also, I'm assuming no grounded shield, yes?
Thanks much!
Jake
Footswitch cable
Moderators: pompeiisneaks, Colossal
-
skyboltone
- Posts: 2287
- Joined: Wed May 10, 2006 7:02 pm
- Location: Sparks, NV, where nowhere looks like home.
Re: Footswitch cable
Link didn't parse right. Which one of all those numbers is the actual catalog number. I'd like to take a look myself.
Dan
Dan
The Last of the World's Great Human Beings
Seek immediate medical attention if you suddenly go either deaf or blind.
If you put the Federal Government in charge of the Sahara Desert, in five years time there would be a shortage of sand.
Seek immediate medical attention if you suddenly go either deaf or blind.
If you put the Federal Government in charge of the Sahara Desert, in five years time there would be a shortage of sand.
Re: Footswitch cable
This is what I use:skyboltone wrote:Link didn't parse right. Which one of all those numbers is the actual catalog number. I'd like to take a look myself.
Dan
http://www.mouser.com/Search/Refine.asp ... _Wildcards
(P/N = 602-1175C-100)
Gil
Re: Footswitch cable
Thanks to both of you.
Skyboltone: P/N is 566-8445-100 at http://www.mouser.com/
Gil: I'll check it out.
I'm thinking about 25 feet for the footswitch chord.
Jake
Skyboltone: P/N is 566-8445-100 at http://www.mouser.com/
Gil: I'll check it out.
I'm thinking about 25 feet for the footswitch chord.
Jake
Re: Footswitch cable
I tried the Belden wire in my first footswitch ever, since Dumble had used it as well... To me, the Alpha is better. Seems to have a thicker jacket and it certainly feels very nice and round. The Belden looks and feels a little bit like a tape worm, for lack of a better description.HiGain wrote:Thanks to both of you.
Skyboltone: P/N is 566-8445-100 at http://www.mouser.com/
Gil: I'll check it out.
I'm thinking about 25 feet for the footswitch chord.
Jake
Gil
Re: Footswitch cable
I recently tried some quad mic cable. It's four conductor with a braided shield. Has a nice rubber jacket like typical guitar/mic cables. Worked well and is available locally in small quantities (most pro-audio stores stock it) for about .50 a ft.
Deric®
Re: Footswitch cable
McMaster carries a 6-conductor 22AWG wire for 35 cents a foot available in lengths of 10 or 25 feet (or more, of course). What you do with the extra conductor is up to you. 
P/N 71335K53
P/N 71335K53
Re: Footswitch cable
Do you have an online source for that one?Deric wrote:I recently tried some quad mic cable. It's four conductor with a braided shield. Has a nice rubber jacket like typical guitar/mic cables. Worked well and is available locally in small quantities (most pro-audio stores stock it) for about .50 a ft.