270 ohm.
CW
Fattening the clean side of a non-HRM
Moderators: pompeiisneaks, Colossal
-
Charlie Wilson
- Posts: 1140
- Joined: Thu Jan 23, 2014 7:32 pm
-
martin manning
- Posts: 14308
- Joined: Sun Jul 06, 2008 12:43 am
- Location: 39°06' N 84°30' W
Re: Fattening the clean side of a non-HRM
That’s going to be affecting the high end, up around 6kHz. Very different from the typical presence.