help with reverb schematic

Overdrive Special, Steel String Singer, Dumbleland, Odyssey, Winterland, etc. -
Members Only

Moderators: pompeiisneaks, Colossal

Post Reply
stubs
Posts: 4
Joined: Wed Jul 07, 2010 10:45 pm

help with reverb schematic

Post by stubs »

Can some one post a schematic for the 3 tube reverb dumble used please
hellrot
Posts: 46
Joined: Mon Apr 16, 2018 1:35 pm

Re: help with reverb schematic

Post by hellrot »

I concur to the question
10thTx
Posts: 1872
Joined: Sat Dec 30, 2006 1:13 am

Re: help with reverb schematic

Post by 10thTx »

Try using search for "Two Rock John Mayer amp"
craigkimble
Posts: 9
Joined: Tue May 11, 2021 2:53 pm

Re: help with reverb schematic

Post by craigkimble »

Like this??
You do not have the required permissions to view the files attached to this post.
Stephen1966
Posts: 1017
Joined: Sun Nov 03, 2019 1:53 pm
Location: Czech Republic
Contact:

Re: help with reverb schematic

Post by Stephen1966 »

craigkimble wrote: Sun Nov 21, 2021 10:25 pm Like this??
Hi craigkimble,

Careful with that one, I didn't test it and in the end, I went with the reverb from the #060. This schematic also shows an unorthodox relay switching and if I were to build this circuit, I would choose to send the signal to ground as in the AB763 style, and the way I built it in the Skyliner.

SKYLINER build - inspired by ODS #124 and #060
https://ampgarage.com/forum/viewtopic.php?f=4&t=34774

The three-tube #060 reverb works, though I'm not finished burning it in yet and I'm still fine tuning...

Aaron Giffin did a schematic for the #060 which you can find elsewhere on this site. The #005 circuit gets great reviews though. Just double check everything and prepare to revise.

Stephen
Stephen
www.primatone.eu
Post Reply