I read on the forum that 250K mid cap is good. Especially if it's a bit on the high side. I got a pot that measures 268, which I plan to use.
But should the mid cap be a certain value when I use a 250K pot? I have 0.047 in now, but I read somewhere that the 250K is for 0.01 mid cap...
What do you recommend?
tommy
Mid pot value
Moderators: pompeiisneaks, Colossal
-
glasman
- Posts: 1446
- Joined: Wed Jan 19, 2005 10:37 pm
- Location: Afton, MN (St Croix River Valley)
- Contact:
Re: Mid pot value
Normally a 250K goes with a .01ufTdale wrote:I read on the forum that 250K mid cap is good. Especially if it's a bit on the high side. I got a pot that measures 268, which I plan to use.
But should the mid cap be a certain value when I use a 250K pot? I have 0.047 in now, but I read somewhere that the 250K is for 0.01 mid cap...
What do you recommend?
tommy
100K with a .047uf.
I use both with the 250K and think it works fine.
Gary
Located in the St Croix River Valley- Afton, MN
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com