Structo wrote:...But you have to decide whether you would rather pay somebody in the USA your hard earned money or somebody living in Malaysia.
This is a VERY good point you make. I'd much rather pay my 'hard earned' to somebody living in Malaysia. You guys will only use it to stuff the global economy.
i`d say WICKED politicians stuff the global economy, and i`d say soon you guys will too..its time for ALL of us to KIK them OUT!!
Structo wrote:...But you have to decide whether you would rather pay somebody in the USA your hard earned money or somebody living in Malaysia.
This is a VERY good point you make. I'd much rather pay my 'hard earned' to somebody living in Malaysia. You guys will only use it to stuff the global economy.
i`d say WICKED politicians stuff the global economy, and i`d say soon you guys will too..its time for ALL of us to KIK them OUT!!
peace, jim
In case you hadn't noticed; Australia managed to avoid the worst of it by having appropriate REGULATION put there by our politicians.
You have a guy trying to implement some basic regulation. Best you support him.
Back to Dumble clones; Nik from Ceriatone builds a damn fine amp.
"The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over. " Hunter S Thompson
Gruffnutz wrote:
This is a VERY good point you make. I'd much rather pay my 'hard earned' to somebody living in Malaysia. You guys will only use it to stuff the global economy.
i`d say WICKED politicians stuff the global economy, and i`d say soon you guys will too..its time for ALL of us to KIK them OUT!!
peace, jim
It`d be easy ta support Obama, IF
He wasn`t a Muslim
his admin was truly transparent
He`d offer a USA birth certificate
He wasn`t FOR abortion
If he acted like aleader, vs knee jerk operations
If He actually MADE his staff read AZ immigration law
He had`t of hired all of Clintons cronies. ( notice who made the Sestak move)
If he`d just listen to the American people period..........esp on health care
But..I do pray for the guy..
Shalom, jim
In case you hadn't noticed; Australia managed to avoid the worst of it by having appropriate REGULATION put there by our politicians.
You have a guy trying to implement some basic regulation. Best you support him.
Back to Dumble clones; Nik from Ceriatone builds a damn fine amp.
groovtubin wrote:i`d say WICKED politicians stuff the global economy, and i`d say soon you guys will too..its time for ALL of us to KIK them OUT!!
peace, jim
It`d be easy ta support Obama, IF
He wasn`t a Muslim
his admin was truly transparent
He`d offer a USA birth certificate
He wasn`t FOR abortion
If he acted like aleader, vs knee jerk operations
If He actually MADE his staff read AZ immigration law
He had`t of hired all of Clintons cronies. ( notice who made the Sestak move)
If he`d just listen to the American people period..........esp on health care
But..I do pray for the guy..
Shalom, jim
In case you hadn't noticed; Australia managed to avoid the worst of it by having appropriate REGULATION put there by our politicians.
You have a guy trying to implement some basic regulation. Best you support him.
Back to Dumble clones; Nik from Ceriatone builds a damn fine amp.
I'd respond to that unfocused, untrue rant; but you're too fkn dumb to even use quote tags properly. Best you go and have a teaparty tosser.
FFS.
"The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over. " Hunter S Thompson
David Root wrote:bfmb, I'll bet I know which one sounds better too! No Contest!
I had no idea old Laneys used Partridge iron. Which ones?
I'm not really able to answer the question, since all they have is some number stamped on the outside, and I haven't been able to get info on the internet, based on those type numbers.
However, take a look at the attached pics maybe it'll give you a clue.
You do not have the required permissions to view the files attached to this post.
Thanx bfbm. The TG numbers I think are the Partridge transformer part numbers.
I was really asking about which old Laney amps have Partridge iron in them. I see one of those transformers is also marked 99 08 which looks like the year and week of manufacture. I would be looking especially for 100W amps.
Correction-I took another look, that 99 08 is actually 99 88, so not a mfg date.
David Root wrote:Thanx bfbm. The TG numbers I think are the Partridge transformer part numbers.
I was really asking about which old Laney amps have Partridge iron in them. I see one of those transformers is also marked 99 08 which looks like the year and week of manufacture. I would be looking especially for 100W amps.
Gotya, I bought two Laney amps back in the mid 90s.
One 50w (Laney LC60)
and one 100w (Laney Supergroup)
They were both Marshall clone (or Fender Bassman clones with EL34 like mid 60s european marshalls) and sounded quite good. However, I want Dumble sound so I just kept the transformers.
Both amps looked like the picture, just to give you a clue, if you happen to find one on ebay.
You do not have the required permissions to view the files attached to this post.
bluesfendermanblues wrote:@Gruffnutz and Groovetubin
Take the dogfight somewhere else.
"A lie unchallenged is very soon stronger than a truth unsupported."
Reginald Hill in Death Comes for the Fat Man
Back to your regular programming.
"The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over. " Hunter S Thompson