Vox AC10 Twin Cabinet plans?

[LeftyStrat]

Anyone have plans or dimensions for the Vox AC10 Twin?

I know the outer dimensions are supposed to be 24" W x 18" H x 9" D.

I have plans for the Vox AC30 cabinet (attached). I suppose I could scale things from the AC30.

[Phil_S]

If I were doing it, I wouldn't sweat too much about the exact dimensions. As you know, a 10" board is really 9.25". Just go with that in 1" (really 0.75") thick lumber and I predict it will work out just fine. An 8' board is 96" and after you square it properly it still has enough for you to cut the 4 boards you'll need for the basic box. If you are going for a pair of 10" speakers, I think you'll do just fine with a 24" wide baffle (easy multiple for standard 4' x 8' ply) and I'd shoot for building around that dimension. For a 24" baffle, the outside cab width will be 25.5", which is just a hair smaller than the AC30 cab and nearly consistent with what you report are the correct dimensions. OK, that's my 2 cents!

OK...a quick search turns up photos here:
http://www.thevoxac30guide.com/vintage_ ... ction1.htm about 25% of the way down. There is enough visual information in these pictures, based on the speaker diameter to estimate the correct size of the cabinet. This is for a single speaker.

[LeftyStrat]

Thanks Phil. That and the out dimensions should get me there.

[Phil_S]

His email is at the top of the page. It's worth asking if he will measure and send you a few detail pictures.

[LeftyStrat]

His email is at the top of the page. It's worth asking if he will measure and send you a few detail pictures.

Unfortunately, I realized that AC10 in his page is a single speaker AC10. I'm looking for the 'Twin' which was a 2x10.

I think I'll still email him, he has probably come across one.

[rp]

Took a while to get this scanned as I've no ink and guess what happens w/ your HP all in one printer when it has no ink?

If you still need, this might help. I did this 20+ years ago so I've no idea how accurate I was being. On the other hand it has the centering for the logo I know it looks like like a 6 year-old did it but it was a very quick sketch, ok?

[LeftyStrat]

Awesome! Thank you so much!