I've started an Express -need power supply board layout

[Wayne Alexander]

I got the chassis from Ron Work (email: rkwork@houston.rr.com), which came with some of the holes drilled, Heyboer transformers from http://toneslut.com/transformers, and I'm busy sourcing parts from Weber, Mouser, Hoffman and Sozo. Yesterday I mounted the transformers, which took a lot of time, since the holes weren't drilled, began drilling my preamp turret board, mounted the mains cable, pilot lamp, on-off and standby switches and the mounting standoffs for the preamp and power supply boards. This takes FOREVER in my hands, because as soon as I finally get the transformer mounted, I'll find that I need to drill another hole under it for a board mounting standoff, etc. Luckily I didn't cut myself too much.

Anyway, a question: has anyone done a good layout for the power supply board, tube connections and so on? I've pieced together a preamp layout and a partial layout for the pots connections from the files on this site, but unless someone's done layouts for the rest of it I'll be fumbling it together from the schematic.

[snide]

Hi Wayne,
Here is a thread that contains a P/S layout which I drew from my express clone. This may give you some ideas.
http://maximoaudio.com/forum/viewtopic.php?p=415#415

One rub that comes into play is the physical size of my layout. I have a large chassis with plenty of room so it wasn't an issue. I am working on rev2 which will have a smaller footprint. The main thing is to use it as a guide.

Eric

[Wayne Alexander]

Eric, would you mind posting that again, or emailing it to me? The other one is corrupted. (edit) nevermind, it works if I copy it to my machine first.

Wayne