Rocket clip clean
Moderators: pompeiisneaks, Colossal
Rocket clip clean
start -all  warmouth parts - boat neck - dimarzio noiseless - thomastic Flats 12's - boss RV3 - Zoom H2 - engineered the warm sound into the cabinet also. Weber 15F150 30W  -
			
			
						You do not have the required permissions to view the files attached to this post.
			
									
						Re: Rocket clip clean
ha, really enjoyed the clip with the tele, thanks!
Thomastic on the tele too?
			
			
									
									
						Thomastic on the tele too?
Re: Rocket clip clean
Thanks overtone- tele has D'Addario nickel 10's roundwound - I had the recorder too close to me- you can hear the pick hitting the strings acoustically- amp was not set loud-  the Weber 15 ceramic is loud anyway 
thanks to RJ for getting us to post the sounds of our amps- imperfect as it maybe. Let get some more sound clips going- if I can figure out how to use
and post clips anyone can.
			
			
									
									
						thanks to RJ for getting us to post the sounds of our amps- imperfect as it maybe. Let get some more sound clips going- if I can figure out how to use
and post clips anyone can.
Re: Rocket clip clean
I liked the Strat clip a lot. Sounds excellent. 
How loud was it when recorded?
Niki
			
			
									
									
						How loud was it when recorded?
Niki
- RJ Guitars
- Posts: 2663
- Joined: Tue Nov 14, 2006 3:49 am
- Location: Los Alamos, New Mexico
- Contact:
Re: Rocket clip clean
Hey Mike,  that is some good stuff. Thanks for posting those up, it really helps us know what the various versions of our amps sound like. Tell us about the amp used in the recording, I know you've built more than one Rocket. Also, i think it would be helpful to tell folks how you recorded your clips. Thank you for sharing!  rj
			
			
									
									Good, Fast, or Cheap -- Pick two...
http://www.rjguitars.net
http://www.rjaudioresearch.com/
http://diyguitaramps.prophpbb.com/
						http://www.rjguitars.net
http://www.rjaudioresearch.com/
http://diyguitaramps.prophpbb.com/
Re: Rocket clip clean
Hi Fellow TAG members
Zoom H2 was about 2 ft off the ground, 8 feet from the amp.
zoom was set to record from one side only - and I had the lowest setting limiter option engaged.
The Amp was RJ's project chassis, circuit board, Edcor 245V PT, Dynaco A470 OT and Edcor choke. 3 F & T 30 uf's and 3 F & T 22 uf's. Sovtek AR4, RJ's El84's
and 3 12AX7's. Amp is fun to play -
			
			
						Zoom H2 was about 2 ft off the ground, 8 feet from the amp.
zoom was set to record from one side only - and I had the lowest setting limiter option engaged.
The Amp was RJ's project chassis, circuit board, Edcor 245V PT, Dynaco A470 OT and Edcor choke. 3 F & T 30 uf's and 3 F & T 22 uf's. Sovtek AR4, RJ's El84's
and 3 12AX7's. Amp is fun to play -
You do not have the required permissions to view the files attached to this post.
			
									
						
