Circuit Board Material - Teflon?
Moderators: pompeiisneaks, Colossal
-
martins3325
- Posts: 94
- Joined: Sun Dec 25, 2005 10:04 pm
Circuit Board Material - Teflon?
I can get some Electrical Grade Teflon for a decent price in .125'' or .250'' thickness would this be a good choice for a eyelet circuit board material?
-
Funkalicousgroove
- Posts: 2235
- Joined: Mon Jul 25, 2005 8:04 pm
- Location: Denver, CO
- Contact:
Re: Circuit Board Material - Teflon?
Most folks use g-10 garrolite, it is available from mcmaster-carr in sheets. If the teflon is anything like the insulation used on hookup wire it is much too flexible and would not be suitable for a circuit board.
Owner/Solder Jockey Bludotone Amp Works