TURRET BOARD FOR ROCKET

[mark enger]

Is there a drill plan for a rocket turret board? chassis drill plans suggest around 9'' x around 2'' iv fabbed the chassis and would like to start my board but cant find recomended board size and are you guys using .375 centers for turrets? thanks mark

[M Fowler]

Just follow the hole layout on page 3 of the attached pdf. Colossal's Express layout should help. I alway's just bought mine for the traditional wrecks. There is a Express and Liverpool board layout but I have never had a Rocket one.

Mark

[mark enger]

Ok cool just what i needed thanks, im just gonna install the board and then draw out the best way to layout components theres really not a ton of parts so one could be very creative on the board, then ill pull it back out drill and stack, i may even try a rocket and a exspress, as ive bent and drilled 2 chassis thanks mark

[Structo]

Yeah you just have to wing it.
I used the layout and cropped the board from it.

Then just sort of drew it out so the parts fit comfortably.

[M Fowler]

Tom,

That should really help out. I do that with many of my projects too or wait for some TAG member to come out with a board layout so I can steal it.

MF

[RJ Guitars]

If you'd like to align with the old style Vectorbord specifications, I suggest using turret hole spacing of .265 inches and overall mounting holes at the locations identified on the attached drawing.